Cranksets

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Not self-extracting

RaceFace CINCH Spindle - Fits 135/142 and 141/148mm Hub Spacing

RaceFace CINCH Spindle - Fits 150/157mm Hub Spacing

For Race Face 30mm Cinch System cranks only. Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle. - 30 x 136.5mm is for 120mm spaced BMX hubs and 68/73mm BBs - 30 x 151.5mm is for 150/157mm Hubs

The RIDE crank arm set offers CINCH versatility, adaptable chainring options, and the 24mm EXI interface system for easier installation and removal. This set is a budget-friendly option with signature RaceFace styling, performance and craftsmanship. - Offers CINCH system compatibility - 24mm EXI interface for easier crank installation - Forged from 6066 aluminum with aggressive styling for a high strength to weight ratio - Compatible with CINCH direct mount alloy or steel rings - Direct mount chainline: 78.5mm / 85mm (Flipped Ring) - 2X Cinch spider chainline: 77mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 190/197 Hubs - Crank Intended Use: Fat Bike - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No

The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately

The RaceFace Aeffect R crankset offers enduro-rated strength in a lightweight XC-style package, making it a solid and dependable crankset choice. - Its forged 7050 AL construction optimizes stiffness without added weight - The Aeffect R features the versatile CINCH system for plenty of interchangeable spider options - Can run alloy or steel CINCH direct mount chainrings - Boost-compatible 24mm EXI interface spindle - Direct mount chainline: 51mm / 57.5mm (Flipped Ring) - 2X Cinch spider chainline: 49.5mm - Boost 2X Cinch spider chainline: 52.5mm - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No - Chainring Included: No

The People's Champ Years of unrivaled strength and durability have earned the Turbine a place in the crankset hall of fame. Compatibility Ability CINCH System is designed to work with your next bike, the bike after that, and the bike after that. Not So Heavy Metal This crankset is forged to maximize strength then machined to shave away every unnecessary ounce of weight. Work Hard, Play Hard The sickest aluminum crank on the trails, thirty years running. The Turbine delivers an incredibly stiff and responsive ride and tons of versatility thanks to proven Race Face tech. Go ahead, get rowdy–Turbine won't let you down. Specs - Chainline 52mm - 136 Spindle - Includes Pedal Washers (Chain Rings & Bottom Brackets sold separately) - Axle Material 7050 Aluminum - Crank Arm Material 7050 Aluminum - Material 7050 Aluminum - Spindle Diameter (MM) 30 - Weight 622g - Weight Conditions 170mm Arms, 32T Alloy Chain Ring

The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. - Forged 7050 aluminum alloy arms - Bracing matrix at the back of the crank arms for added stiffness - Industry standard 30mm spline interface - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames, as well as the RF BMX spindle and spider - Spindle diameter: 30mm - Direct mount chainline: 48.5, 55mm (Flipped) - 2X Cinch spider chainline: 47mm - Boost 2X Cinch spider chainline:50mm - Weight: 690g

- Manufactured from UD Carbon with matte clearcoat - Handmade in Canada - SixC G2 Pedal Insert for increased Rally Factor - Burlier 7050 Spindle - Cinch technology for game-changing compatibility

Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells

Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - CINCH technology offers game-changing compatibility - Includes 30mm CINCH spindle - Direct mount chainline: 52mm / 58.5mm (Flipped Ring) - 2X Cinch spider chainline: 50.5mm - Boost 2X Cinch spider chainline: 53.5mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 135/142 MTB Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Chainring BCD: Direct Mount CINCH - BB Included: No

Built off the proven Next R crank arm shape and spindle insert, the Next SL stands to be lighter, with major improvements in durability and carbon consistency. Made in Canada with American-sourced carbon, the Next SL is also stiffer, improving power transfer and giving you the competitive edge on your pedal-oriented cross country rig. - Increased stiffness and strength improves power transfer - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Includes 30mm CINCH spindle, and is power meter compatible - Direct mount chainline: 52mm / 58.5mm (Flipped Ring) - 2X Cinch spider chainline: 50.5mm - Boost 2X Cinch spider chainline: 53.5mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Chainring BCD: Direct Mount CINCH - Weight: 418 - BB Included: No

Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

Race Face Chain Retention System Parts • For use with English threaded bottom bracket shells with no ISCG mount tabs

- Forged 7050 AL gives this crank phenomenal strength, earning it an Enduro rating at light weight - E-bike crankset - Impressive strength to weight ratio - Black satin finish - CINCH direct mount for easy 1x Can be 2x with removeable spider (sold separately)

RaceFace Ride crank arms are forged from 6066 aluminum with aggressive styling for a high strength to weight ratio. - Bottom bracket sold separately

Race Face's Respond crank is engineered to offer an optimal combination of strength, stiffness, & weight. - Intended for all-mountain or downhill use - AL-7050 crankarms and spider - Removable granny spider for single ring use - Forged and CNC-machined chromoly BB spindle - Triple wiper seal bearings are filled with Phil Wood waterproof grease - For aggressive riders on a budget - Exi interface allows easy installation and removal

- Deep pocket forged and CNC machined to optimize strength and stiffness while shaving every ounce of uncessary weight - Industry standard 30mm spline interface - Incredibly stiff and responsive - CNC machined 7050 alloy - 30 years of refined design - Chainring sold separately

Designed to handle aggressive All Mountain riding at an XC crank weight. - Compatible with BB92 press-fit, PF30 or BB30 conversion - Net shape-forged AL-6066 arms with forged and CNC machined chromoly BB spindle - Machined AL-7075 chainrings - EXI interface allows easy installation and removal - Includes Team 68/73 bottom bracket - 49-52mm adjustable chainline - The following Chainring sizes include a bash guard: 36/24, 34, and 32

- Intended for XC, Trail and Enduro use - Utilizes Race Face CINCH technology for interchangable spiders in 2X, 3X and direct mount chainring configurations, multiple spindle options and compatability across all relevant frame standards - 30mm spline interface machined from 7050 aluminum alloy - Removable spider offers the ability to convert between existing chainring standards while remaining flexible for future developments - Includes 68/73mm CINCH spindle and narrow wide ring - BB Options: BB92, 68/73 BSA, 100mm BSA, PF30 (sold separately)

Designed, tested and manufactured in Race Face's Canadian facility with US sourced carbon and aluminum. NEXT SL combines proven Race Face proprietary hollow arm technology with their new "Cinch" interface. Interchangeable spiders, limitless ring combinations, a 30mm alloy spindle, and compatibility across all relevant frame standards. - Spider, direct mount chain rings and bottom bracket sold separately - TL6800 is required to assemble removable spider or direct mount chain ring - Crank arms are completely hollow with all unnecessary material being removed from the center core- no internal aluminum spine - Industry standard 30mm spline interface CNC machined using a newly commercialized aluminum super alloy only available in North America - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments

The R-Hawk checks all the standard boxes for an all-mountain/enduro crank. Like ROTOR’s REX cranks, the R-Hawk is a work of engineering built on the principles of lightweight and rigid, but R-Hawk’s modular concept offers compatibility that meets – and even exceeds – current trends in mountain bike technology. Crank arms will be available independent of an axle and chainrings; there’s no longer a factory-assembled arm+axle, and both crank arms can be removed from the axle. This way the R-Hawk can be mounted to standard, boost, and downhill axles. - Lightweight, modular 6082 aluminum arms with exceptional stiffness-to-weight ratio, with the ability to handle the demands of enduro and DH - OCP direct mount rings allow the rider to configure to their optimum chainring position for maximum power transfer - Axle spindle, spacer, DM ring, and bottom bracket options are available separately - Due to the inset bore location of the pedal threading, some flat pedals with a large inboard bearing may not be compatible with the crankset or crank boots

Inspired by the six victories of our athletes at the legendary Cape Epic, we thought it was only appropriate to name our lightest and stiffest crank ever after our most successful mountain bike race to date — and thus the ROTOR Kapic was born. Arguably the most prestigious marathon stage race, the Cape Epic sends riders into grueling, rocky climbs, forested singletrack, and rock-laced descents that require a crank that delivers stiffness and control that won't waiver under pressure, and we've crafted the Kapic to do just that. Much like our popular Hawk Crankset, the new Kapic is designed with an innovative modular system that allows you to select each crank component individually, based on your unique bike setup and your own physical characteristics. It features the same spline interface as the Hawk, so you can utilize the strength of Hawk chainrings, but combines with a weight-saving Kapic spindle to lighten your ride, and lighter crank arms for almost a half-pound of weight savings when compared to the Hawk. We designed the Kapic with Direct Mount technology that features a spline interface that connects the crank arm, axle, and chainring, allowing simple assembly and disassembly of your crankset. This enables you to choose the perfect chainring size for each ride, and easily remove and install a chainring with a single bolt. But the versatility of Direct Mount doesn't stop at modularity, it also enables us to employ Optimal Chainring Positioning (OCP), which, when combined with a Q ring, allows you to adjust your chainring position a single degree at a time to precisely configure your crank for maximum power and comfort. Crafted using expert CNC processes, KAPIC is built from 6082-aeronautic-grade aluminum, and includes our Trinity Drilling System, with three internal holes from axle to pedal, giving the dual benefit of an exceptionally light crank with superior stiffness to handle the toughest of MTB routes. The Kapic has been designed to mirror the strength, agility, and speed of Africa's fastest land mammal, so you can soar down the singletrack like a cheetah sprinting after its prey. To pay homage to the home of the race, we gave the Kapic bold aesthetics and iconic patterns that symbolize the geometric designs of tribal Africa. Weight: 365g (170mm arms only), 545g (170mm crankset, boost axle, 32t chainring, and boots) - Ultralight, modular 6082 aluminum arms with exceptional stiffness to weight ratio - OCP direct mount rings allow the rider to configure to their optimum chainring position for maximum power transfer - Axle spindle, spacer, DM ring, and bottom bracket options are available separately - Due to the inset bore location of the pedal threading, some flat pedals with a large inboard bearing may not be compatible with the crankset or crank boots

Take control of your crankset with complete modularity from ROTOR's new ALDHU cranks. These streamlined cranks combine an innovative modular structure with top-tier 7075-aeronautic grade aluminum, allowing you to adjust your axles and chainrings to individually customize your ride based on your needs, and your bike's standards. It begins with the 3D+ CNC machining to ensure unmatched rigidity from spindle to chainrings so you can take control on the roughest roads. The ALDHU is available with two different 30-millimeter spindle options that offer stiff power, and room for rim brakes or disc brakes. A wealth of crank-arm lengths allows you to optimize your power, while OCP Mount technology lets you further fine-tune your ride with Q rings. The ALDHU’s proprietary, patent-pending design is based on the modularity of each crankset component. The ALDHU's name comes directly from our racing heritage. It is an abbreviation of Alpe d’Huez to commemorate ROTOR’s first iconic victory at the Tour de France with Carlos Sastre. - Modular 7055 aluminum arms with exceptional stiffness-to-weight ratio - OCP direct mount rings allow the rider to configure to their optimum chainring position for maximum power transfer - Axle spindle, spacer, DM rings (1x/2x) and bottom bracket options available separately - Optional 4x110BCD spider available, use RR-2520

SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.