Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$9.95
Light-duty zip tie - 200mm length x 2.5mm - Bag of 100
$34.95
Replace an old Topeak babyseat or just change color for a new look. - Replacement Pad Set only for Topeak Baby Seat II
$13.50
Never get caught without a towel! TYR's soft, absorbent, synthetic Dry-Off Sport Towel is small enough to keep stashed in your training bag and can be used to dry off and wrung out repeatedly. Plus, a storage case is included, too.
$35.00
• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction
Nylon cable ties - 8 inches long
$29.99
- Tough lightweight injection molded plastic - Adjustable to fit 20 inch or larger wheel
$30.00
This adaptor makes 135mm rear MTB axle compatible with any stationary fluid/wind trainer. - Stainless steel construction for durability. - Fits 135 x 12mm rear axle. - Compatible with 5mm Allen for easy installation.
$50.00
Specialized's Alloy Ski-Tip Extensions are lightweight and ergonomic, perfect for optimizing your aero position. The 40-degree aluminum ski-tip extensions offer 10mm of lateral jog to fit a wide range of arm widths. The 22.2mm outer diameter is compatible with many standard aftermarket aerobar clamps, and at 400mm long, they can be cut to fit your specific reach.
$25.00
This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm
$39.99
Keep your pants clean with SKS's Chainboard chain guard. This handy device bolts onto the chainstay and bottom bracket, and utilizes a telescoping design to fit a wide variety of frames.
$20.00
Protect your chainstay and other wear areas from harsh chainslap and other frame damage maintaining your bike's strength and beauty. The rubberized strip is 50mm wide and each roll is 1000mm long. Wrap up the stay or trim a custom shape to protect the frame. RideWrap protection accessories are made with high-quality RideWrap materials that are bike-tested for long-term durability. All RideWrap protection accessories have been designed to give riders leading protection for their dollar. - Matte black finish - Fits all makes, models, and sizes - Protects from harsh chainslap and other damage - 50mm x 1000mm roll - Designed around mountain bike geometry - Kit includes instructions and pre-install cleaning wipe
$35.00
For the price point rider who wants a core level of protection for key areas of their frame. Perfect for preventing damage from cable rub and acute wear and tear. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed around mountain bike geometry - The Essential MTB Frame Kit includes protection for toptube, downtube, 4 stays, and extra pieces to provide approximately 30% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet
$40.00
Applications: - Center Kickstand - Push spring movement - Aluminium-die cast GD-AlSi9Cu3 Delivery: - incl. screw and washer - Optional: plate - Kickstand Shoe pair optional Material: - Powder-coated black/metallic silver - Pin steel hardened, galvanized - Screw M10x55 - Washer galvanized F6 Specifications: - Support 58x31x66 - Strut length L1 Modell S 290/26" - Strut length L1 Modell L 320/28" - max. Strut length 28" - Weight Modell L 542g - max. Load 25kg
$139.95
Park's Adjustable Shop Stool is ideal for quickly maneuvering into the best position when working on your bikes. It's adjustable from 17 to 22 inches high and features 5 smooth-rolling wheels for easy scooting. You'll also love the comfy padded seat with Park's colorful logo.
$7.95
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
$99.99
- Color kits for OneUp riser bars plus some extra stickers for whatever you choose
$25.00
- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film - It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between. - Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals. - It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary! - Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale. - Made in the USA
Ever notice the gaping hole on the bottom of your Fork Steerer? For a while, we’ve been trying to develop a single product that would plug ALL tapered forks. It took so long because tube thickness varies, depending on the fork's travel and its manufacturer. It was also necessary in our vision, that the Fork Cork would be easily removable without tools. Each cork and turn knob is milled from a solid core of high quality aluminum, then anodized for style and longevity. The stainless steel screw will not rust despite the rough elements it will see. The proprietary neoprene washer will last through as many twists and turns you throw at it, and Fork Corks are manufactured and assembled in the USA to ensure they’re up to your quality standards. - What items will fit depends on the length of your steerer. - Wrap item(s) in a cloth to prevent rattling. Use the Fork Cork to secretly stow: - Tracker for bike theft - Emergency Space Blanket - Multi-Tool - C02 cartridge(s) and Adapter - Pocket Knife - Money or Gold Coins - Water proof lighter/Matches - Poncho - Granola Bar and/or a Lollipop - Party Favors
$39.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 2 large and 2 medium patches - 3 small frame protectors - 2 large frame protectors
$14.99
Puncture resistant neoprene makes Lezyne's Chainstay Protector extremely durable and helps reduce chain noise. The interior Lezyne logo pattern is made of slip resistant rubber. The fabric stretches to a tight fit and is held in place with heavy-duty Velcro. It is also machine washable to clean out months of dust and dirt.
$9.99 - $25.00
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$20.00
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$70.00
This ultra versatile mount can be used three main ways: as a camera grip, extension arm or tripod. The folding arm is perfect for POV or follow-cam footage, and makes it easy to capture selfies without the mount appearing in the shot. When detached from the arm, the handle doubles as a camera grip. Stored inside the handle is a lightweight, mini tripod that can be removed and used on its own or combined with the handle. Expands to 20” (50.8cm), collapses to 7.5” (19cm).
$30.99
Features - E-Bike specific kickstand - Designed to handle the additional weight of battery assisted Giant bicycles - Adjustable leg assures the perfect fit for all frame sizes Fits: - Road-E - Quick-E - Dirt-E - ToughRoad GX-E - Explore-E - Vall-E - Amiti-E
$29.95
The Utility Changing Mat provides a clean surface to change into and out of your riding gear. It keeps your feet clean when gearing up and keeps dirt and mud contained when you gear down. Once you're ready, the bag simply folds into itself and cinches closed to hold your dirty gear encased and your car tidy. - Keeps your feet clean and dry while ensuring nothing gets left behind - Durable Nylon bag for carrying all of your gear to the trailhead - Converts into a large changing mat to keep your feet clean and dry - Quickly cinches back into a bag so nothing gets left behind
$65.00
What size bottom bracket do I need? What size seatpost do I have? What size bearings do I need for my headset? All valid questions for beginner bike mechanics and technical specialists alike – and all answered with the precision Digital Caliper. With accuracy to 0.01mm (0.0004-inch) and a 15cm (6-inch) capacity, this all-metal caliper is twice as accurate as our competitors and sets the benchmark for Imperial and Metric measurement. - Accurate measurement to 0.01mm (0.0004-inch) - Total length capacity of 15cm (6-inch) - Easily swaps between Metric and Imperial - Accurately measures inside diameter (ID), outside diameter (OD) and depth - Stainless steel metal body - Metal display body with oversize LCD display - Metal set screw for freezing measurements - Metal precision dial-wheel for ensuring accurate measurement - Common size dimension chart located on back plate - Zero function for clearly and accurately identifying length differences - Auto shut-off saves battery life - Protective hard case included - (1) 1.55v LR44 battery included - 1-Year Warranty
$35.00
- Stable 2-Stay mount - Made of alloy - Button type tool-free adjust - Fits wheels from 20-inches to 700C
$75.99
A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes
$70.00
A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across
$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
Page 1 of 7 Next page