Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Mountain Frames

$699.00
As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)
$899.00
Ice Cream Truck solves the problem of having to choose between a fat bike and a trail bike. It boasts a symmetric 190mm-spaced Chromoly frame, suspension-corrected 150mm-spaced fork, and sporty trail-oriented geometry. Supported by massive 4.8" tires, itis ready to deftly tackle nearly any terrain. - 100% Surly Chromoly steel with 44mm headtube and internal dropper post cable routing - Frame is E.D. Coated for increased life expectancy - 1-1/8" straight steerer fork, Chromoly steel - 100mm threaded bottom bracket shell - Front and rear thru-axles, non-off-set - Universal cast dropouts accommodate thru-axle or quick-release standards
$999.00
The Karate Monkey features updated, progressive trail geometry, our custom trumpet tubeset and Surly’s Gnot-Boost rear dropout system. Available in a variety of colors, with multiple drivetrain and wheel size configurations. - 100% Surly Chromoly steel frame and fork; double-butted main triangle and 44mm headtube - The tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing. Works with 142, 148 12mm thru, as well as 135mm w/ 10/12 washer - Internal dropper seatpost routing with 30.9mm seat tube ID - Clearance for 29 x 2.55 or 27.5 x 3 tires
$999.00
The Karate Monkey features updated, progressive trail geometry, our custom trumpet tubeset, and Surly's Gnot-Boost rear dropout system. Available in a variety of colors, with multiple drivetrain and wheel size configurations.
$999.00
Karate Monkey is a highly versatile trail bike that plays the part of 29er and 27.5+ equally well. Karate Monkey delivers a resilient, lively ride on all sorts of gnarly terrain. Its frame is a highly-versatile canvas for whatever dirty masterpiece your brain cooks up. According to our computing machine (Thor) it can be set up in approximately 487 different configurations. Originally designed as a 29er (and the frame that helped spark the 29" wheel movement), the latest Karate Monkey is designed to perform just as admirably as a 27.5+ rig as well. This allows you to pick your poison — provided your poison is having a really great time while permanently donning a huge grin, of course. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29" x 2.5" or 27.5" x 3" tires
$999.00
The Karate Monkey frame features updated, progressive trail geometry, a new tubeset, and Surly’s Gnot-Boost rear dropout system to support multiple drivetrain and wheel size configurations. - 100% Surly 4130 chromoly steel frame and fork; double-butted main triangle and 44mm headtube - Tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing works with 142 x 12, 148 x 12mm, and 135mm w/ 10/12 washer - Internal dropper seatpost routing - 30.9mm seat tube ID - Clearance for 29 x 2.55 or 27.5 x 3 tires
$999.00
The Krampus is the bike that started it all — the plus-size movement that is. Krampus features Surly’s Gnot-Boost rear hub spacing of 145mm; compatible with Boost 148 x 12mm thru-axle, 142 x 12mm thru-axle and 135mm quick-release hubs. - 100% Surly 4130 CroMoly steel frame and fork; double-butted main triangle and 44mm headtube - New tube-set uses the same trumpet tubes found on 2017 Karate Monkey frame - Gnot-Boost adjustable rear dropouts - Internal dropper seatpost routing - 30.9mm seat tube - Designed to fit up to 29 x 3.0” tires
$999.00
As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It's shown people the light of how high-volume, large-diameter tires can vastly improve the ride experience. It's also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension-corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29 x 3" tires
$999.00
As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It's shown people the light of how high-volume, large-diameter tires can vastly improve the ride experience. It's also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension-corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29 x 3" tires
$899.00
The Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. It’s the bike you turn to when you’re not entirely sure what the night has in store. It’s the bike to grab when you want to have just much fun riding to the trail as you do from the trail itself. Singlespeeding is an integral part of Surly’s DNA, and the Lowside continues the tradition, by taking a simpler approach to trail riding. - 100% Surly 4130 Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Singlespeed “specific” (derailleur hanger but no Trip Guides) - Dropper post routing - Gnot-Boost rear spacing - Front and rear thru-axle - 26 x 3” or 27.5 x 2.8” tire clearance
$899.00
Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. Your BMX Bike All Grown Up Lowside is like the grownup version of the bike you rode when you were a kid and still had hopes and dreams and some semblance of ambition. It's just as happy riding singletrack as it is parked outside your favorite drinking establishment. Lowside is a single speed mountain bike. Singlespeeding has been a part of Surly's DNA since day one when we launched the 1x1 Rat Ride. After a lot of Homie Fall Fests and more feats of strength than we can recall, we decided to discontinue it a couple years back. Lowside picks up right where the 1x1 left off. "Some have dubbed the Lowside the ultimate pub cruiser." - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Spec'd in alternating years with 26 x 3" or 27.5 x 2.8" tires, the Lowside remains capable of running either option
$1,199.00
Designed to go where no normal fat bike can, the Surly Moonlander is for riders who want otherworldly capabilities on rocky shorelines, sand, snow, and desolate landscapes not yet discovered. It’s the ultimate choice for explorers who itch for the next great adventure, and aren’t afraid of what they might find. - Constructed from 100% Surly Chromoly Steel for excellent durability - Clearance for 24 x 6.25” tires, as well as 26 x 5.1", 27.5 x 4.8", and 29 x 3" - Comes with rack and fender mounts, as well as accessory mounts on both fork blades to enhance cargo capacity - Four frame sizes to fit most riders: SM, MD, LG, XL
$899.00
The Ogre can get you to your job during the week, then way out of town on the weekend. It’s not sluggish on pavement or gravel and can also hold its own on singletrack. Ogre brings several sensible features to the 29er platform, including horizontal slotted dropouts with Gnot-Boost spacing, a tweaked non-suspension corrected geometry, and a beefy tire clearance. - 100% Surly Chromoly steel, double-butted main triangle - TIG-welded, Horizontal slotted with derailleur hanger, Gnot-Boost spacing allows the use of 135mm QR hub, 142 x 12mm thru-axle or 148 x 12mm Boost hubs. Features Rohloff torque arm slot and threaded eyelets for fenders, racks and Surly trailer mounts - Full-length Surly Trip Guide housing line guides for derailleurs and brakes; two sets of bottle cage mounts; upper seatstay threaded barrels, mid- and low-blade fully threaded through-blade fork eyelets; threaded holes for racks, fenders and trailer mounting nuts; Rohloff OEM2 axle plate mounting slot - Disc brakes only. Disc mounts are 51mm IS. Note: rear disc brake is limited to 160mm maximum rotor diameter and requires the use of Surly caliper adaptor (included with frames and bikes) - Frame is E.D. coated for increased life expectancy - Tire clearance for 29 x 2.5" or 27.5 x 3"
$799.00
The All-Around Fat Bike Wednesday sits in the middle of our Trail category, but don't let that fool you into thinking that's its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat tire trail bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday's ability to play both parts equally will suit you well. Or, if you're looking for a fat bike and don't need the fattest tires on the market, Wednesday's 26 x 4.6" tire clearance is just the ticket. "Any day of the week's a great day to ride a Wednesday." - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8" tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6" tires on an 80mm rim Specs: - Rear Dropout Configuration: Horizontal slotted with optional vertical dumpout - Rear Hub Spacing: 12 x 177mm (Surly axle included); 10 x 170mm with Surly 10/12 Adapter Washers (not included) - Front Hub Spacing: 15 x 150mm (Surly axle included) - Rear Brake: Disc - 51mm I.S. (203mm max rotor) - Front Brake: Disc - 51mm I.S. (203mm max rotor) - Head Tube: Ø44mm - Steerer Tube: Ø28.6mm (1-1/8") - Crown Race: Ø30mm (1-1/8") - Stock Headset Upper (S.H.I.S.): ZS44/28.6 - Stock Headset Lower (S.H.I.S.): EC44/30 - Front Derailleur (Clamp): High direct mount top-pull (Ø34.9mm) - Max Chainring (CL): 1x (Fat bike 170): 34T; 2x (Fat bike 170): 26/38T; 2x (Surly OD): 22/36T - Tire Clearance Frame: 26 x 4.3" (rear axle position); 26 x 3.8" (front axle position); 29 x 3.0" - Tire Clearance Fork: 26 x 5.25"; 29 x 3.0" - Rigid Fork Spec: 468 x 47mm - Max Suspension Fork Length: 511 x 51mm (Fatbike 100mm) - Bottle Mounts Frame: 2 Standard (XS - M); 3 Standard (L - XL) - Bottle Mounts Fork: 2 Three-Pack - Rack Mounts Frame: Yes (upper and lower threaded) - Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded) - Fender Mounts Frame: Yes - Other Features: Internal dropper post routing compatible
$799.00
The All-Around Fat Bike Wednesday sits in the middle of our Trail category, but don’t let that fool you into thinking that’s its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat tire trail bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday’s ability to play both parts equally will suit you well. Or, if you’re looking for a fat bike and don’t need the fattest tires on the market, Wednesday’s 26 x 4.6” tire clearance is just the ticket. "Any day of the week’s a great day to ride a Wednesday." - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8? tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6? tires on an 80mm rim
$599.95
The version 2.0 of the Riff offers practical updates in features and geometry without going all-in with progressive geometry that almost everyone in chasing. We wanted to keep this frame a hardtail that's great for bike packing and familiar-feeling on long days in the saddle on rolling terrain. There is a slightly steeper seat angle for more efficient climbing and shorter seat tubes to benefit dropper posts. Tough Broski Sliding Dropouts allow you to run single-speed, geared or even hub gears. Rear hub spacing in updated to Boost 148 . A modified chainstay allows fitting even some double cranks with “plus size” 2.8? wide. - ED coating inside frame and under the paint increase rust resistance - Boost 148mm rear hub spacing - Geometry is optimized for 120mm forks. Will work well with a 100mm fork, too. - Tange Prestige heat-treated butted CrMo steel; butted CrMo rear end - ISO disc brake tabs - IRD Broski Sliding Dropouts - S-bend seat stays and chainstays - Rear rack and fender eyelets - Dropper post cable routing runs on downtube and inside the seat tube - 34.9mm seat collar(not included), 400mm post recommended - CNC-machined 44mm headtube: Will fit 1-1/8" steerers with a ZeroStack 44 headset or fit tapered steerers with a ZS44 upper assembly and external cup (EC44) lower assembly - Recommended tire size: 27.5 x 1.95" ‚Äi 2.8" - Only the Large size frame comes with bottle mounts on the seat tube - 5.7 lbs (XS)
$999.00
If there’s one thing Tom knows, it’s dirt. When he first designed the Ultra he knew it would appeal to riders who demand specific ride characteristics and dirt slaying only he could deliver- and that was in the 1980s! Good design withstands the test of time, and the latest iteration of the Ultra is a prime example. Like its predecessor from 30 years prior, the new Ultra occupies a unique ride space from cross-country riders looking to get rowdy and go big to enduro riders lusting for some all-mountain shredding. Designed around a 120mm travel fork and super stable Boost 148 spacing, most of the fun is in the wheels. Designed to accommodate 29" or 27.5" wheels, the Ultra is highly versatile. Throw on some 29s for some trail-smashing XC riding, or saddle up some 27.5+ for some serious no-holds-barred shredding. The Ultra is a rough and rugged trail master that doesn’t know when to quit. - Compatible with 27.5 x 2.8 and 29 x 2.4 tires - Internal routing for a dropper post - Boost 148x12 rear spacing
$3,500.00
Techs & Features: Advanced Composite Technology Giant’s High Performance Grade raw carbon material is used to produce this custom frame material in our own composite factory with a high stiffness-to-weight ratio. The front triangle of these framesets is assembled and molded as one continuous piece in a proprietary manufacturing process called Modified Monocoque Construction. Advanced Forged Composite Technology A state-of-the-art high-pressure molding process is used to produce complex-shaped carbon fiber components that are lighter, stiffer and stronger than similar components made from aluminum. This technology is used in critical performance parts such as Maestro Suspension rocker links. FlexPoint Pro Suspension Technology Developed as a superlight rear suspension setup for XC bikes that demand efficiency, control and responsive handling, FlexPoint Pro is a linkage-driven, single-pivot system that delivers 100mm of rear-wheel travel. It’s engineered with a full-composite swingarm that significantly reduces overall frame weight.
$5,800.00
From early pioneers like Rob Warner in the 1990s to world champions including Myles Rockwell (2000) and Danny Hart (2011), many of downhill racing's greatest legends have flown the flag for Giant over the years. This special-edition frameset celebrates that heritage with vintage Giant colors and design. Beneath the stunning paint lies cutting-edge DH design and technology including full-composite construction, an all-new Maestro suspension system, and ultra adjustability to tackle different types of DH terrain. KEY PERFORMANCE FACTORS RACE-READY SUSPENSION A new Maestro rear suspension system, developed over several seasons of World Cup racing with Giant engineers and pro athletes, features 200mm of smooth, active travel for race-winning speed. The rear suspension is paired with a 203mm travel fork, providing superior confidence and control on the most extreme DH racetracks and trails. ULTRA ADJUSTABLE Three flip chips provide unprecedented adjustability. First, a three-position Maestro flip chip lets you dial in frame geometry for your riding style and terrain. Next, a new headset flip chip adjusts reach so you can easily achieve perfect positioning. And finally, a rear dropout flip chip lets you adjust the overall wheelbase and handling characteristics. REAR WHEEL OPTIONS Choose either a 29-inch or 27.5-inch rear wheel. Frameset can be built with a mixed wheel "mullet" setup that many racers prefer with the smaller rear wheel creating a snappy, agile feel and increased saddle-to-tire clearance in the rear. For those who favor the rollover speed and stability of two 29-inch wheels, you can easily swap out the rear wheel. HIGHLIGHTS: Thoroughly reengineered from the ground up, the new Glory Advanced features a lightweight, super strong composite frame, 200mm of Maestro rear suspension (with a 203mm fork up front), and multiple flip chips to dial in geometry, rear wheel size, fit and positioning. The stock setup is a mixed-wheel configuration with a 29-inch front and 27.5-inch rear, striking a perfect balance of roll-over speed and maneuverability. Riders also have the option to switch to a 29-inch rear wheel using a simple two-position flip chip on the rear dropout. The legend is back. ADVANCED COMPOSITE Mainframe and rear swingarm crafted with high-performance grade raw carbon fiber and custom resin that's custom made in Giant's own composite factory. Handcrafted monocoque construction makes it extremely lightweight, stiff and compliant. MAESTRO SUSPENSION Four strategically positioned pivot points and two linkages all work together to create a single floating pivot for the most active, efficient and independent suspension system on the trail. ADVANCED FORGED COMPOSITE A state-of-the-art high-pressure molding process is used to produce the hybrid aluminum/carbon fiber upper rocker link that's lighter, stiffer and stronger than pure aluminum. ADJUSTABLE DH GEOMETRY Frame geometry can be adjusted between three settings to match riding style and terrain. You can select a 61.6, 62 or 62.3-degree head angle and corresponding 78.4, 78.8, or 79.1-degree seat tube angle, resulting in a 13, 8 or 3mm bottom bracket drop (size M/L). ADJUSTABLE WHEELBASE A flip chip on the rear dropout can be set to a Long or Short position to adjust the wheelbase and rear-center measurement. The Short position results in quicker, more agile handling for tight, technical terrain. The Long position extends the wheelbase for added stability on faster trails with longer straightaways and high-speed cornering. REACH ADJUST A three-position flip chip at the headset lets riders quickly dial in cockpit dimensions and geometry. This modular system has two positioning chips that can be removed and swapped to achieve a Short (-5mm), Mid (0mm) or Long (+5mm) reach and fine-tune the bike's handling and rider positioning. REAR WHEEL OPTIONS Riders can choose either a 29- or 27.5-inch rear wheel, paired with a 29-inch front wheel. The larger 29-inch option improves stability and roll-over capabilities, while the 27.5 option delivers a more agile, snappier feel. It's a quick and easy change to adjust the bike's handling and feel. MEGADRIVE A massive rectangular down tube and oversized top tube provide superior lateral and torsional steering precision. The precisely engineered, rectangular shaped down tube yields unprecedented steering and pedaling stiffness.
$3,900.00
Go fast, get rowdy and nail new lines. With a full-composite chassis, developed with Giant's enduro racing pros, this hard-charging 29er has 160mm of maestro rear suspension, adjustable geometry, and the option to switch to a 27.5-inch rear wheel. KEY PERFORMANCE FACTORS: - Race-bred suspension A Maestro rear suspension system with 160mm of travel, paired with a 170mm fork, was developed and tested under the extreme conditions of Enduro World Series races. The trunnion mount shock has a longer stroke (62.5mm compared to 60mm on the previous gene - Adjustable enduro geometry Flip chip technology lets you switch between three settings depending on the terrain. You can select a 63.5, 63.9 or 64.2-degree head angle and corresponding 78.3, 78.7 or 79-degree seat tube angle, resulting in a 35, 30 or 25mm bottom bracket drop (size - Rear wheel options Riders can choose either the stock 29-inch rear wheel or switch to 27.5. The larger 29-inch option improves stability and roll-over capabilities, while 27.5 delivers a more agile, snappier feel. It's a quick and easy way to adjust the bike's handling and TECHS & FEATURES: - ADVANCED COMPOSITE TECHNOLOGY Giant's High Performance Grade raw carbon material is used to produce this custom frame material in our own composite factory with a high stiffness-to-weight ratio. The front triangle of these framesets is assembled and molded as one continuous piece in a proprietary manufacturing process called Modified Monocoque Construction. - ADVANCED FORGED COMPOSITE TECHNOLOGY A state-of-the-art high-pressure molding process is used to produce complex-shaped carbon fiber components that are lighter, stiffer and stronger than similar components made from aluminum. This technology is used in critical performance parts such as Maestro Suspension rocker links. - MAESTRO SUSPENSION TECHNOLOGY Four strategically positioned pivot points and two linkages all work together to create a single floating pivot for the most active, efficient and independent suspension system on the trail. - OVERDRIVE Giant's original oversized fork steerer tube technology. Designed to provide precise front-end steering performance, the system's oversized headset bearings (1 1/4" lower and 1 1/8" upper for road, 1 1/2" lower and 1 1/8" upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness. - TUBELESS SYSTEM Fewer flat tires. Greater traction. Less rolling resistance and a smoother, faster ride. Giant's Tubeless System makes it easier than ever to experience all these benefits. - FLIP CHIP - MAESTRO The flip chip allows riders to quickly adjust the geometry of their Maestro-equipped mountain bike to better suit how and where they ride. It lets riders change the headtube/seattube angles and bottom bracket height via eccentric (offset, two-position) hardware located on the upper rocker arm.
$2,650.00
Shred hard and shred fast with this lively 29er. it’s built on an all-new full-composite frame with adjustable geometry, giving you smooth control to blitz technical trails at speed. ADJUSTABLE FRAME GEOMETRY - New flip chip feature lets you change the head tube and seat tube angles, as well as the bottom bracket height, to fine-tune handling for varying trail conditions and individual riding style. 29ER CONFIDENCE AND CONTROL - Larger 29-inch diameter wheels optimized to roll over rough terrain with balance and stability, giving you the momentum to tackle technical climbs and the confidence to fly on fast, rugged singletrack descents. PROGRESSIVE TRAIL DESIGN - Lightweight Advanced-grade composite frameset features a longer reach and steeper seat tube for aggressive trail riding and improved climbing capabilities. Updated Maestro rear suspension features 120mm of rear wheel travel paired with a 130mm fork up front. ADVANCED COMPOSITE TECHNOLOGY - Giant’s High Performance Grade raw carbon material is used to produce this custom frame material in our own composite factory with a high stiffness-to-weight ratio. The front triangle of these framesets is assembled and molded as one continuous piece in a proprietary manufacturing process called Modified Monocoque Construction. ADVANCED FORGED COMPOSITE TECHNOLOGY - A state-of-the-art high-pressure molding process is used to produce complex-shaped carbon fiber components that are lighter, stiffer and stronger than similar components made from aluminum. This technology is used in critical performance parts such as Maestro Suspension rocker links. FLIP CHIP - MAESTRO - The flip chip allows riders to quickly adjust the geometry of their Maestro-equipped mountain bike to better suit how and where they ride. It lets riders change the headtube/seattube angles and bottom bracket height via eccentric (offset, two-position) hardware located on the upper rocker arm. MAESTRO SUSPENSION TECHNOLOGY - Four strategically positioned pivot points and two linkages all work together to create a single floating pivot for the most active, efficient and independent suspension system on the trail. OVERDRIVE - Giant’s original oversized fork steerer tube technology. Designed to provide precise front-end steering performance, the system’s oversized headset bearings (1 1/4” lower and 1 1/8” upper for road, 1 1/2” lower and 1 1/8” upper for mountain) and tapered steerer tube work in conjunction to provide optimal steering stiffness.
$529.95
So here it is. The Rhythm is back. Only this time it moves to your beat. The NEW Rhythm is a 26” wheel aluminium JUMP/PUMP/4X/PLAY bike frame, built for big airs, endless laps, and elbow to elbow antics. - 26" wheeled aluminum JUMP/PUMP/4X/PLAY frame built for big airs, endless laps, and elbow to elbow antics - 6061 T6 aluminum alloy frameset - Two lengths available - Interchangeable dropouts: 12x142mm geared or 135x10mm single speed (DROPOUTS NOT INCLUDED WITH FRAME) - Sliding dropout system for chain tensioning and adjusting chainstay length - Compatible with 100-140mm forks - Fits tires up to 26x2.5" - PM 160mm disc brake mounts - 34.9mm seat clamp and additional stickers included
Page 1 of 1