Wheels

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high-pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. Countless Configurations CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately. Why Choose CZR i23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases.

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

Team 30 Comp 700C Wheelset - Alloy 30mm section clincher rim - CNC braking surface - Artisan built, entirely by hand - Includes QR-22, rim tape and spoke protector - Manufacturer claimed weight of 1820g

The Disc version of the Team30 brings an affordable semi-aero wheelset to the latest generation of disc brake-equipped bikes. Construction is very similar to the rim brake Team30, with 30mm deep aluminum rims and CNC machined hubs with sealed cartridge bearings. Disc brakes put very different loads on wheels than rim brakes, so the Team30 Disc is beefed up with more spokes 24 front, 24 rear. 2-cross lacing at the front and a mix of 2- and 3-cross at the back deals with the torque demands of disc brakes. - Tubeless Ready / Clincher Alloy 30mm depth rim - CNC machined aluminum hubs - Sealed cartridge bearings - Aero bladed DP spokes

The Disc version of the Team 35 brings a semi-aero wheelset to the latest generation of disc brake-equipped bikes, featuring a 35mm deep alloy rim that's Tubeless ready and laced to disc brake hubs. - Alloy 35mm depth rim, Tubeless ready - clincher compatible - Center-Lock Disc brake hubs with sealed cartridge bearings - Laced with round spokes, Artisan built, entirely by hand

With a semi-aero shape and 23mm ID, the Trimax Aero-Gravel is a perfect choice for performance gravel bikes. - Tubeless ready clincher, alloy rim with 30mm depth - CNC machined alloy hubs with cartridge bearings - Aero bladed DP spokes, 21F / 24R with ABS self-locking nipples - Includes TA-12 and X-12 adapters

The Metron 45 SL TL Disc is the tactical wheelset essential to your quiver. The Metron 45 is an “all-around” wheelset built to take you from climbing all the way to gravel or CX. Victorious on the Cyclocross course, the cobbles of the spring classics, and the torturous mountain stages in the Pro peloton, this wheelset can handle whatever you put them through. - Full Carbon wheelset produced with Vision reliability and high-performance technology - Tubeless ready design, with tubeless valve and rim tape included -45mm depth and 21 mm inner width - P.R.S. alloy hubs with 6 sealed cartridge bearing (2F + 4R) - 21 spoke front, 24 spoke rear, 2:1 laced, Aero bladed straight pull spokes and ABS locking spoke nipples - Artisan built, entirely by hand - Includes spoke protector, cassette spacer, and wheel bag

The Metron 60 SL TL is Vision’s Aero Stage Race wheelset. The Metron 60 is the one wheel you’ll ride once and won’t want to ride without again; it sits comfortably in the mid-range of Vision’s Metron rim depths and offers the most versatility in the line up. - Full Carbon wheelset produced with Vision reliability and high-performance technology - Tubeless ready design, with tubeless valve and rim tape included - 60mm depth and 21 mm inner width - P.R.S. alloy hubs with 6 sealed cartridge bearing (2F + 4R) - 21 spoke front, 24 spoke rear, 2:1 laced, Aero bladed straight pull spokes and ABS locking spoke nipples - Artisan built, entirely by hand - Includes spoke protector, cassette spacer, and wheel bag

The Symbol front wheel pairs the amazing Shadow Symbol front hub with the impressive Shadow Truss rim to create an unmatched combination. A set it and forget option for those who seek quality, value, and strength in a complete front wheel. Summed up in one word…. Integrity. - Shadow Truss Rim - Shadow Straight 14 gauge stainless steel spokes in a 3 cross pattern - Shadow Symbol Front Hub - 2 Proprietary Plastic non drive side hub guards

The Symbol Cassette wheel pairs the value and reliability of the Shadow Symbol cassette hub with the rigidity and strength of the Shadow Truss rim to create an unbeatable combination. Including a replaceable plastic non drive side hub guard and laced 3 cross to the wider, 38mm Truss rim, this wheel is ready for action without any extra consideration. - Shadow Truss Rim - Shadow Straight 14 gauge stainless steel spokes, in a 3 cross pattern - Shadow Optimized Freecoaster Hub - Proprietary plastic non drive side hub guard - Left side and Right side drive configurations

When the next step in freecoaster design is combined with the future of aftermarket rim design, the result is a wheel that cannot be surpassed. The Optimized freecoaster rear wheel is designed around modern-day street riding; this combination of game changers will leave any rider confident that they made the right choice. - Shadow Truss Rim - Shadow Straight 14 gauge stainless steel spokes with 3 cross pattern - Shadow Optimized Freecoaster Hub - Proprietary plastic non drive side hub guard - Left side and Right side drive configurations

Teravail Fluent carbon mountain bike wheels elevate weeknight trail rides and bikepacking adventures alike. The Teravail Fluent carbon rim delivers a light and lively ride feel with a durable design backed by a lifetime warranty. Fluent wheels are hand-laced, tensioned, and trued in Minnesota with reliable DT Swiss 350 hubs, spokes, and nipples for a trouble-free ride. Fluent wheels are engineered for a seamless experience with Teravail’s wide selection of MTB tires for easy tubeless setup, optimal tire profiles, and a tunable ride experience. - 30mm internal rim width - Hookless rim design with extra- thick flange holds up to singletrack adventures - Reinforced rim spoke bed with washers for extra durability - Front-optimized rim drilling for better spoke bracing angles - Optimized for use with Teravail Tubeless Tape, valves, and tires - Fluent rims are backed by a lifetime warranty for original owner under appropriate use - DT Swiss 350 hubs are smooth, reliable, and easy to service - Built with DT Swiss Competition spokes and DT Swiss Pro Lock nipples - Teravail Tubeless Tape installed and Tubeless Valve included - ETRTO compliant - Rim tested to ASTM category 3 - All Fluent wheels are hand-laced, trued, and tensioned in our Minnesota warehouse by professional wheel builders - 850g with tubeless tape and valve

Sun Ringle Duroc 30 Junit Front Wheel. SUNRinglé's product development team set out to design a system for kids, using high-quality and high-performance components.

The Mulefut 80SL V2 for exploring deep backcountry territory or racing the local snow circuit. Mulefut 80SL V2 is the fatbike rim reinvented. - Trapezoid-cut Mulefut 80SL V2 rims for optimum widestance tire shaping, trailduty impact resistance, STR tubeless tire retention, and more weight savings - J-bend SRC hubs with high-strength Dual-Tooth pawls and lightweight aluminum axles - Wheelsmith doublebutted spokes and brass nipples, precision tension balanced with SpokePrep assembly compound for longevity - Mulefut wheels come with rimstrips and tubeless tape pre-installed

Duroc wheels feature a lightweight, double-walled rim designed to support aggressive riding with high-volume and true plus-sized tires. SRX hubs are easily serviceable and offer 90 points of engagement. - Includes everything you need to get riding - includes freehub drivers, tubeless tape pre-installed, valve, and sealant - SRX hubs use sealed cartridge bearings

Duroc wheels feature a lightweight, double-walled rim designed to support aggressive riding with high-volume and true plus-sized tires. SRX hubs are easily serviceable and offer 90 points of engagement. - Includes everything you need to get riding, both Shimano and SRAM XD style freehub drivers, tubeless tape pre-installed, valve, and sealant - SRX hubs use sealed cartridge bearings

Versatility, durability, and performance designed for the gravel adventurer. Proven Duroc rim technology, wide tubeless channel, and easy tubeless setup, the Duroc G30 Expert is ready to roll. - Duroc Alloy rim with welded seam - Tubeless Ready: Factory Taped, with valves and sealant included - Ringle SRX hubs with improved performance - Shimano HG11 Road and SRAM XDR freehub bodies included - 12° engagement driver

Duroc SD37 is the result of real-world EWS racing and good old-fashioned downhill thrash testing. - Welded and eyeleted Duroc SD37 rims for maximum impact resistance, widestance tire shaping, and STR tubeless tire retention - Straight-pull SRX hubs with high-strength Dual- Tooth pawls and precisionground steel axles - Wheelsmith doublebutted spokes and brass nipples, precision tension balanced with SpokePrep assembly compound for longevity - E-MTB approved for electric bicycles

The Mulefut 80SL V2 for exploring deep backcountry territory or racing the local snow circuit. Mulefut 80SL V2 is the fatbike rim reinvented. - Trapezoid-cut Mulefut 80SL V2 rims for optimum widestance tire shaping, trailduty impact resistance, STR tubeless tire retention, and more weight savings - J-bend SRC hubs with high-strength Dual-Tooth pawls and lightweight aluminum axles - Wheelsmith doublebutted spokes and brass nipples, precision tension balanced with SpokePrep assembly compound for longevity - Mulefut wheels come with rimstrips and tubeless tape pre-installed

The Mulefut 80SL V2 for exploring deep backcountry territory or racing the local snow circuit. Mulefut 80SL V2 is the fat bike rim reinvented. - Trapezoid-cut Mulefut 80SL V2 rims for optimum wide stance tire shaping, trail duty impact resistance, STR tubeless tire retention, and more weight savings - J-bend SRC hubs with high-strength Dual-Tooth pawls and lightweight aluminum axles - Wheelsmith double butted spokes and brass nipples, precision tension balanced with SpokePrep assembly compound for longevity - Mulefut wheels come with rim strips and tubeless tape pre-installed

The Rampage rear wheel features a sealed bearing hub, 14mm axle and a Rampage double-walled rim. - Includes Stolen PVC rim strip

Rampage Pro front wheel features a low flange aluminum hub shell with precision sealed bearings, female axle and 3/8" chromoly bolts. It is laced 3X with 14G spokes and brass nipples to the Stolen Chamber rim, designed with a multi chamber system to increase strength while decreasing weight. - Low flange aluminum hub shell with Heat-treated chromoly female axle (3/8") - CNC alloy cones and Sealed, 6000 bearings - Stolen Chamber rim with multi wall design - 6061 Aluminum rim with welded construction, 17mm sidewall height, 36mm wide, 36H

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

The Rampage Pro Street wheel features a low flange aluminum hub shell with precision sealed bearings and chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen LowPro brakeless rim, designed with no braking surface to increase rim width and strength with a clean and unique look. - Low flange aluminum hub shell - Heat-treated chromoly axle - CNC alloy cones - Sealed, 6000 series bearings

The Rampage Pro rear wheel features an aluminum hub shell with precision sealed bearings, 9 tooth driver and 14mm heat-treated chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen Chamber rim, designed with a multi chamber system to increase strength while decreasing weight. - Aluminum hub shell with Heat-treated chromoly axle - CNC alloy cones and Sealed bearings - 1-piece chromoly (9T) driver -Stolen Chamber rim with multi wall design - 6061 Aluminum rim with welded construction, 17mm sidewall height, 36mm wide, 36H - Two Thermalite Drive and Non-drive Hub Guards Included - Cassette style hub and Clutch-style freecoaster hub options - Left-hand and Right-hand drive configurations

The Rampage Pro Street wheel features a low flange aluminum hub shell with precision sealed bearings and chromoly axle. It is laced 3X with 14G spokes and brass nipples to the Stolen LowPro brakeless rim, designed with no braking surface to increase rim width and strength with a clean and unique look. - Low flange aluminum hub shell - Heat-treated chromoly axle - CNC alloy cones - Sealed, 6000 series bearings - 9t Chromoly driver w/ 3-pawl system

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)

Arch S2 wheelsets have the versatility to handle a wide range of riding conditions and are the ideal upgrade for Trail, AM, Enduro, and eBikes. When your average ride includes both tough climbs and rough descents and you want the best tubeless system in the business, the Arch S2 is for you. - Versatile 28mm internal rim width optimized for 2.2-2.5" tires - 6061 aluminum with sleeved joint and stainless steel rim eyelets - Patented BST low-profile rim shape for easy tubeless inflation and the most reliable seal - Matched wheelsets use traditional J-bend lacing and share a single spoke length for easy serviceability - E-sync hubs feature Enduro bearings with double-row freehub bearing and cromoly axle offer 47% increase in max torque capacity over Neo hubs - Connection program includes 3-year E-sync hub warranty, a 3-year S2 rim warranty, a 1-year crash replacement, and $10 donation to trail maintenance or advocacy group of your choice - Tubeless tape installed requires additional valve stems