Wheels

Enjoy flat-land speed and rocket up mountains, too, with Zipp’s 202 Firecrest Carbon Disc Brake wheels. Not only do these light wheels set a high climbing standard, they also excel over rough roads and handle like champs in stiff crosswinds. The slippery profiles of Zipp's 32mm-deep, 25.4mm-wide dimpled rims are more aerodynamic than even many deep-section wheels. Zipp's 77D/177D disc hubs give you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. Plus, they're super smooth thanks to precision bearings. And, the finishing touch is Sapim's outstanding CX-Ray spokes.

Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.

Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more and minimize pinch flats.

Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more.

Zipp hits high all-around marks with their 303 Firecrest Carbon Clincher wheelset, thanks to a wide tire bed and mid-aero profile. The 28.5mm rim width provides confident control in nasty crosswinds and on rough roads, and the 45mm Firecrest rim profile offers wind-shedding aerodynamics while maintaining great acceleration characteristics. Zipp's 77/177 hubset, laced with Sapim CX-Sprint spokes, provides maintenance-free reliability and lateral stiffness, and trusted stopping power comes via Tangente Platinum Pro Evo brake pads. Included with each wheel are a Zipp-integrated Valve Extender with valve-core wrench, rim tape, and quick release.

Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between the rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at a lower pressure, which boosts ride quality and comfort and reduces rolling resistance. Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's outstanding CX-Ray spokes.

Zipp's 404 Firecrest Carbon Clincher wheelset is a testament to all-around advancement in wheel design. Its 58mm aero depth and wide profile provides proven performance in all situations, and at 1,690g (700c), you'll feel confident staying the course in less-than-ideal conditions. Whether you're looking for everyday riding performance or a race day wheelset to stay ahead of the pack, the 404 Firecrest has a great balance of weight, stability, and efficiency that complements strong riders. Zipp's 77/177 hubset, laced with Sapim CX-Sprint spokes, provides maintenance-free reliability and lateral stiffness, while trusted stopping power is supplied via Tangente Platinum Pro Evo brake pads. Included with each wheel are a Zipp-integrated Valve Extender with valve-core wrench, rim tape, and quick release.

Zipp optimized its Firecrest technology to build a highly aerodynamic 82mm rim—the 808 Firecrest Carbon Clincher Disc Brake. Designed for efficient power transfer and stable control in time trial and triathlon competition, the 808's wide 27.5mm rim shape provides confident tracking in crosswinds and over rough surfaces. Built with Zipp's excellent 77/177 hubset that features optimized flange geometry and Sapim CX-Sprint spokes to increase lateral stiffness, this 1,1885-gram wheelset combines toughness and reliability in a wind-shedding package that has to be ridden to fully appreciate. Each wheel includes specially-designed Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, rim tape, and quick release.

Zipp optimized its Firecrest technology to build a highly aerodynamic 82mm rim—the Zipp 808 Firecrest Tubular. Designed for efficient power transfer and stable control in time trial and triathlon competition, the 808's wide 27.5mm rim shape provides confident tracking in crosswinds and over rough surfaces. Built with Zipp's excellent 77/177 hubset that features optimized flange geometry and Sapim CX-Sprint spokes to increase lateral stiffness, this 1,700-gram wheelset combines toughness and reliability in a wind-shedding package that has to be ridden to fully appreciate. Each wheel includes specially-designed Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, rim tape, and quick release.

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-M475 (Black), Shimano logo, M9x100mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp handling, smooth riding, extra durable, and 22% less likely to pinch-flat your tires, in addition to being some of the lightest weight production wheels on the planet. - Bearing Type: SiNC Ceramic Sealed cartridge - System Weight Limit: 275lbs / 125kg - Total Wheelset Weight: 1240g

From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that’s unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions. Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels. What’s being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you’re able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what’s ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels. Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer—the Roval Terra CLX II checks every box with authority. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width - ERD 577mm - Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm - Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step, from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

From the purist gravel racer to the mixed-surface fanatic, Terra CLX II provides a level of weight savings and material confidence that's unheard of in the all-road or gravel space. This tier of weight-savings translates to rocket-like acceleration off the starting line, nimble performance in the hills, and unleashed efficiency on those loaded-down long-haul excursions. Weighing in at just 1250 grams, the Roval Terra CLX II are the lightest wheels in their class, rivaling pure climbing wheels in terms of weight and out-performing in raw toughness. We were able to get even lighter than before (50 grams lighter) by utilizing Low Flange Disc (LFD) hubs, borrowed from the Alpinist CLX II wheels. What's being carried forward from the previous generation, is the rim. With its multiple Unbound victories, we we kept what was already class leading, and extended our lead. Because Terra CLX II is a hooked rim, you're able to ride almost any tire and pressure. Thanks to the 25mm internal width, they work seamlessly with 28-47c tires (up to 80 PSI), giving you options to customize your setup for what's ahead. Using Roval LFD hubs, still spinning on DT Swiss 180 hub internals, Terra CLX II continues to provide flawless ride quality. The CINC ceramic bearings inside do some serious heavy lifting when it comes to the efficiency of these wheels. Even with laundry list of demands that need to be met for the serious gravel racer, to the all-road explorer-the Roval Terra CLX II checks every box with authority. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width—ERD 577mm - Hub: Roval Light Hub (LF13/LF14R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 21 count, DS: 278mm, NDS: 290mm, Rear: One-cross/Two-cross (2:1), DS: 290mm NDS: 288mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm Tire Size: 28mm—47mm—Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi Weight: Wheelset 1,250g, Front 570g, Rear 680g (excludes 15g, tubeless rim tape and tubeless valve) Assembly Method: Hand built at every step, from rim layup to the last nipple turn. Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Built for aggressive all-mountain action, SRAM's Rail 50 wheels balance the strength and stiffness you need with the lightness to climb quickly back to the top. Lean it over and carve into corners on the 28mm outside rim width that provides a huge tire footprint, then stomp on the pedals and feel the rapid engagement of the legendary star ratchet engagement freewheel system. Ditch the tubes with full UST tubeless compatibility, and reap the rewards of excellent traction, control, and fewer flats. And, the Rails are packed even more great features, like the Solo Spoke design that uses one spoke length to fit the entire wheel and Quick Release/Through Axle endcaps that can be interchanged without tools.

Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Feel your bike come alive on the open road with the new Alpinist CL II, featuring the lightest, best-handling clincher rims we have ever made, elevated with the performance of a tubeless system. The brand new Alpinist CL II now brings mountain-taming performance slightly closer to earth with a carefully selected build designed to let riders take full advantage of the low rim and spoke mass. The Alpinist CL II utilizes the same rim as the alpinist clx ii. They react to even the slightest increase in power with immediate acceleration and carve the purest lines in the corners, yet they can also handle almost double the impact standards of every certifying body. The result is a 1375-gram tubeless wheelset with an otherworldly ride quality designed for real-world road pressures. The Alpinist CL II utilizes components curated to keep you rolling and rolling fast. The DT Swiss 350 hubs, featuring their star ratchet drive system, are reliable and easy to service, while 24 DT Swiss comprace straight-pull spokes front and rear, laced to the rims with their alloy pro lock nipples, are synonymous with reliability and can be obtained at any bike shop. The reduced rolling resistance of a tubeless setup is undeniable, as are the benefits of improved handling and incredible puncture protection. It took the most extensive and demanding engineering and testing program we've ever undertaken. As a result of this extensive development, the Alpinist CL II features a hooked rim that can handle a huge range of pressures up to 110psi and offers an easier set up and mounting experience than ever. - Rim: Alpinist CLX Carbon Clincher, 700c, Disc Brake, Tubeless - Rim Details: 33mm Depth, 27mm External Width, 21mm Internal Width - Hub: DT Swiss 350 Straightpull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Radial/Two-cross (2:1) 21 count, DS: 276mm, NDS: 290mm; Rear: Two-cross (1:1) 24 count, DS: 283mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,375g, Front 606g, Rear 769g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

When we set out to create a lightweight wheelset, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest wheelset out there with the aerodynamic attributes of something twice its depth. One wheel that'll get you to the base of a climb quickly and up it as efficiently as possible, yet still be strong enough for day-to-day abuse. It was a tall order, but in the end, the CLX 32 gave us more than what we asked for. Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category. For the CLX 32 rear clincher, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes to create the best overall system. This results in a 730-gram, 21mm-wide (internal width) rear wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents. Each CLX 32 clincher rear wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AF1, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Rim Depth: 32mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal - Spoke Count: 24 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 730g

Elevating Weekend Hot Laps to World Cup XC Status From weekend hot laps to World Cup XC finals, the Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs. An unmatched level of durability, precision, and performance in this new Carbon Control wheelset that is purpose-built to open terrain, from gut-wrenching climbs to tear-inducing descents – a whole new era of riding. A high-performance wheel that excels everywhere from world cup xc races to your favorite weekend trail. The Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs and spokes. This level of quality, precision and performance has previously been found only on wheels costing twice as much. - Rim: Control SL 29, 29mm Internal Width, Zero Bead Hook 4mm FlatTop Design, Tubeless Compatible, Compatible with Tire Inserts - Spoke Pattern: 28-Hole Two-cross (1:1) Non Driveside Front and 28-Hole Two-cross (1:1) Rear - Spoke Type: DT Competition Race Straighpull—Front Driveside 301mm, Non-Driveside 300mm , Rear Driveside 298mm, Non-Driveside 301mm - Nipple Type: DT Swiss Hexagonal Prolock Alloy - Hub: DT Swiss 350 Straight-pull, 6-bolt, 36t Star Ratchet System, 110x15mm & 148x12mm thru-axle compatible - Weight: Set—1450g w/ Tubeless Rim Tape - Assembly Method: Hand-built - Extras: 19 and 31mm OD end cap options included, Roval Spoke Kit, Tubeless Rim Tape and Valves, Lifetime warranty - System Weight Limit: 275lbs/125kg

Fastest XC Wheels In the Real World 1240 grams is an obscenely light weight when talking about mountain bike wheelsets, the kind of weight that XC racers dream about. But light weight alone is no longer enough. So, we engineered the new Control SL wheels to be sharp handling, smooth riding, extra durable, and 22% less likely to pinch-flat your tires, in addition to being some of the lightest weight production wheels on the planet. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook 4mm FlatTop design. Compatible with tire inserts. - Rim Width: 29mm internal - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. Max Rotor Size <200mm - Front Spoke Pattern: DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross - Rear Hub: CNC-machined alloy body, SiNC Ceramic Bearings, premium-quality DT 180 internals and 36t quick engagement ratchet system cassette, includes SRAM XD Driver and 148 end caps. Max Rotor Size <200mm - Rear Spoke Pattern:DT Swiss Aerolite Straightpull 294mm, 24-hole, Two-cross - Bearing Type: SiNC Ceramic Sealed cartridge - Nipple Type: DT Swiss Pro Lock Hexagonal Alloy 14mm 2.0mm - Total Wheelset Weight: 1240g - System Weight Limit: 275lbs/125kg

The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road. - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,590g, Front 725g, Rear 865g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - System Weight Limit: 275lbs /125kg.

The all-new Rapide CL II wheelset brings the Rapide CLX II’s speed, efficiency, incredible handling, and stability in any conditions to more riders. Built on the exact same rims as the Rapide CLX II to elevate all this performance with tubeless-done-right technology, the Rapide CL II makes that performance easier to catch at check-out and you almost impossible to catch on the open road. - Tire Size: 24mm - 38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm – 38mm: Tubeless (60psi) Tubed (60psi). - Weight: Rear 865g (including 15g, tubeless rim tape and tubeless valve). - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - System Weight Limit: 275lbs / 125kg

When we set out to create a lightweight wheelset, we didn't want it to be "just another climbing wheel." We wanted to provide the lightest wheelset out there with the aerodynamic attributes of something twice its depth. One wheel that'll get you to the base of a climb quickly and up it as efficiently as possible, yet still be strong enough for day-to-day abuse. It was a tall order, but in the end, the CLX 32 gave us more than what we asked for. Our design process started with a low overall weight at the forefront, as we knew what weight we could hit with the information and technology we had available. With that weight in mind, we then turned our focus to aerodynamics and began an iterative process of designing and testing over 150 individual rims to find the optimal shape. These innumerable Computational Fluid Dynamics (CFD) models, Win Tunnel hours, and shots of espresso left us with a 32mm-deep shape that boasts more logged wind tunnel time than any other wheel in its category. Once we found the most aerodynamic shape, at the 32-millimter depth, we came back to the weight focus and proceeded to experiment with over 40 different layup methods to reach our desired weight. And this made the CLX 32 lighter and faster than every other competitor in the lightweight wheel category. For the CLX 32 clincher front, we mated the rim to our Aero Flange (AF) series hub with DT Swiss Aero spokes in order to create the best overall wheel system. This resulted in a 553-gram, 21mm-wide (internal width) front wheel with an extremely low inertia value. In cycling, inertia relates to the amount of force it takes to accelerate or decelerate, so wheels that are built with lightweight rims, like the CLX 32, result in a lower inertia value that creates a lively wheel that allows you to accelerate, decelerate, and change direction with less effort. But why so wide? Well, additional width does three primary things for a rim, it provides additional structural strength, it allows for a clean rim and tire interface when using wide tires (resulting in enhanced aerodynamics and faster rolling properties), and it better supports the tire in hard cornering. This boosts both predictable grip and confidence when things get twisty on the descents. Each CLX 32 clincher front wheel also employs the legendary CeramicSpeed bearings and comes with our padded wheelbag, quick-release, tubeless plugs, tubeless valve, and SwissStop Black Prince brake pads. - Assembly Method: Hand-built - Brake Track Height: 12mm - Braking Surface: Carbon fiber - Extras: Roval padded wheelbag, Roval steel quick-release, Roval tubeless plugs and tubeless valve, SwissStop Black Prince brake pads - Front Hub: Roval AF1, CeramicSpeed bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 32mm - Rim Material: Carbon - Rim Type: Carbon clincher, 2Bliss Ready - Rim Width: 20.7mm internal - Spoke Count: 16 - Spoke Pattern: Radial - Spoke Type: DT Swiss Aerolite T-head - Weight: 550g

RaceFace asymetric rim is optimized for balanced spoke tensions producing a high performance and longer lifespan wheel. DT Swiss spokes and nipples are laced to Bear Pawl hubs for for exceptional value and performace exceeding the competitors in this class. A great choice for mid-level mountain bikes that need a replacement wheelset or a noteable upgrade to value based mountain bikes. - Professional tubeless tape installation included - 30mm inner rim width - Aysmetric Rim - Bear Pawls hub

RaceFace asymetric rim is optimized for balanced spoke tensions producing a high performance and longer lifespan wheel. DT Swiss spokes and nipples are laced to Bear Pawl hubs for for exceptional value and performace exceeding the competitors in this class. A great choice for mid-level mountain bikes that need a replacement wheelset or a noteable upgrade to value based mountain bikes. - Professional tubeless tape installation included - 30mm inner rim width - Aysmetric Rim - Bear Pawls hub

Shiny wheels at great prices. Rim Brake, Fixed/Freewheel, Polished/Silver, Clincher

The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Rear wheel for track style and fixie bikes. Flip flop hubs allow freewheel one side and fixed the other. You'll be hard-pressed to find a better wheel anywhere near these prices. - Rim brake use - Formula hub

Single-wall rims, sealed bearing hubs, stainless steel spokes and premium nipples - all at lowest pricing. These wheels are the new standards in affordable repair solutions.

Single-wall rims, sealed bearing hubs, stainless steel spokes and premium nipples - all at lowest pricing. These wheels are the new standards in affordable repair solutions.

Made with ultralight composite rims, this pro-level mid-profile aero disc WheelSystem is a great all-around weapon for sprinting to the podium or a solo attack on a ride in the mountains. The SLR 1 42 Disc is a fine balance between efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 42mm deep full-composite disc brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 21H Front & 24H Rear - Alloy locking nipples - Giant alloy hub shell, Centerlock Disc rotor mount and pawl based driver system - Includes end caps for the following configurations: - Front: 100x12mm T/A & 100x5mm QR - 1580g per pair

Made with ultralight composite rims, this pro-level aero WheelSystem is unbeatable whether you’re sprinting for the podium or alone against the clock. The SLR 1 55 blends proven aero performance with maximum transmission stiffness and superior braking control in a value-oriented package. Features - Ultralight 55mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell with pawl based driver system - 1670g per pair

Made with ultralight composite rims, this pro-level aero WheelSystem is unbeatable whether you’re sprinting for the podium or alone against the clock. The SLR 1 55 blends proven aero performance with maximum transmission stiffness and superior braking control in a value-oriented package. Features - Ultralight 55mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell with pawl based driver system - 1670g per pair

The wheel that first merged aero with high volume tires, designed to make you faster on all road surfaces. Proven on the cobbles of Paris-Roubaix. - Intended Use: Road, All-Road - Inner rim width: 25mm - Aero Optimized Tire Size: 27 – 32c - Tubeless-only AERO FOR ALL ROADS The SES 4.5 AR is an uncompromising aero wheel designed specifically for disc brake equipped bikes and large volume 27 to 30mm tubeless road tires. Rebellious, unconventional, and pioneering are words that describe the one of its kind SES 4.5 AR. Conceptualized for the cobbles of Paris-Roubaix through our partnership with Team Dimension Data, the SES 4.5 AR was developed to deliver top shelf aero performance, stability, and comfort for virtually any road surface. The SES 4.5 AR is available as a tubeless clincher and tubular model rim. The SES 4.5 AR borrows from ENVE M Series carbon mountain wheel tubeless technology and features hookless beads. Hookless beads improve aerodynamic performance by aiding airflow from tire to rim as well as allow for the best tubeless tire performance possible. Like all Smart ENVE System aero wheels, the front and rear rims are specifically designed for the airflow seen at the front and back of the bike. As such, the front rim is more shallow and wider to maximize stability and the rear is deeper and narrower to aid in drag reduction. In addition to dissimilar geometries, the SES 4.5 AR features a disc brake specific construction that saves weight, improves strength, and creates an unprecedented ride quality.

Mountain bikes are becoming longer, slacker, and faster. The M 1900 SPLINE 30 is our answer to these developments. The rim is very durable and offers a 30mm rim width, which eliminates tubeless tire burping and allows you to reduce the tire pressure to keep you in greater control. Twenty-eight cold-forged spokes tension the rim in a DT Swiss straight pull hub to provide the ultimate balance of light weight and stiffness. No matter how steep or how rocky your trail, the M 1900 SPLINE is more than up to the challenge.

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Precise Handling At Full Speed. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for XC riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Whether you're looking to take it to the limit on a climb or throw down in a sprint, Campagnolo's Bora One 50 Clincher wheels are where it's at. Their deep-dish carbon rims and aero spokes are exactly what you need to slice through the wind and move to the head of the pack. They're also feathery light to give you a boost when the road turns uphill. And, the hubs house Cult ceramic bearings for a zippy ride. - Full carbon rim is 24.2mm wide for extra stability with clincher tires—increases wheel stiffness, reactivity, and aerodynamics - 3Dimant braking surface treatment eliminates imperfections in the rim and break-in period common to carbon wheels while increasing wet and dry braking performance - G3 spoking pattern reduces stress while increasing rigidity for optimal power transfer - CULT ceramic bearings for the ultimate smoothness - 1435 grams per pair - Recommended 25c tire and larger

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty

Riding is believing with the Zipp 1ZERO HITOP SW MTB wheelset when it comes to making you faster. Trail compliance is vital, with modern cross-country races becoming rougher and more challenging. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1ZERO HITOP SW carbon rim complies with the terrain thanks to Zipp's proprietary HITOP Technology for carbon layup. The result is a lightweight XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. You don't have to work hard to spin it up to speed or fight your bike when things get chunky. The 1ZERO HITOP SW also comes with the TireWiz tire-pressure monitoring system, so you'll always have your tire pressure dialed in for optimal performance. Among the lightest on the market, the ZM2 SL hubset ensures you'll be quick to accelerate and back on the pedals sooner after corners with the 1ZERO HITOP SW. - HITOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough - Low weight for effortless accelerations and climbing - Winged rim provides a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit - TireWiz 2.0 tire-pressure monitoring system features a seamless design - ZM2 SL hub with 66 points of engagement - Standard or Torque Cap options on the front hub - XD or Microspline driver-body options - Lifetime Warranty

The 1Zero HiTop S wheelset melds high value with high performance for a better and faster ride. Trail compliance is vital, with modern cross-country courses becoming rougher and more challenging. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1Zero HiTop S carbon rim complies with the terrain thanks to Zipp’s proprietary HITOP Technology for carbon layup. The result is a light XC race or adventure wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. The 1Zero HiTop S features the dependable ZM 900 hubset. - Carbon – 24H Hookless rim, compatible with Tube-type or Tubeless tires - HITOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough - Low weight for effortless accelerations and climbing - Winged rim provides a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit - Sapim CX Sprint spokes laced to the ZM 900 SL hub with standard or Torque Cap options - Lifetime Warranty - Compatible with TyreWiz tire pressure monitoring system, sold separately

The 1Zero HiTop S wheelset melds high value with high performance for a better and faster ride. Trail compliance is vital, with modern cross-country courses becoming rougher and more challenging. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1Zero HiTop S carbon rim complies with the terrain thanks to Zipp’s proprietary HITOP Technology for carbon layup. The result is a light XC race or adventure wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. The 1Zero HiTop S features the dependable ZM 900 hubset. - Carbon – 24H Hookless rim, compatible with Tube-type or Tubeless tires - HITOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough - Low weight for effortless accelerations and climbing - Winged rim provides a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit - Sapim CX Sprint spokes laced to the ZM 900 SL hub with XD Driver and 52 points of engagement - Lifetime Warranty - Compatible with TyreWiz tire pressure monitoring system, sold separately

The 1Zero HiTop SW carbon rim complies with the terrain thanks to Zipp’s proprietary HITOP Technology for carbon layup. The result is a lightweight XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. You don’t have to work hard to spin it up to speed or fight your bike when things get chunky. The 1Zero HiTop SW also comes with the TyreWiz tire-pressure monitoring system, so you’ll always have your tire pressure dialed in for optimal performance. Among the lightest on the market, the ZM2 SL hubset ensures you’ll be quick to accelerate and back on the pedals sooner after corners with the 1Zero HiTop SW. - Carbon – 24H Hookless rim, compatible with Tube-type or Tubeless tires - HITOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough - Low weight for effortless accelerations and climbing - Winged rim provides a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit - TyreWiz 2.0 tire-pressure monitoring system included - Sapim CX Ray spokes laced to the ZM2 SL hub with standard or Torque Cap options - Lifetime Warranty

Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheelset and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - Lifetime Warranty

Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty

- Versatile aero wheelset for the modern road bike with tubeless and hookless rim profile - Optimized tire bed for easy tire installation - Wide 23mm rim profile creates a better tire interface to be fast on or off the road - New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Ships with 12mm front and rear end caps - Center locking rotor interface. Lockring is included with the wheels - 1470g - Lifetime warranty

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions. - Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping. - Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses. - More than 400 grams lighter than its predecessor - Hookless rims for a more seamless and aerodynamic transition between tire and the rim - Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability. - Center locking rotor interface. Lockring is included with the wheels - 1360g - Lifetime warranty

- TSE design with 23mm internal width with tubeless and hookless rim profile ideal for wider tires at lower tire pressure - Minimum 25mm tire width - More than 300 g lighter than previous model - ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - An all-out aero 80mm rim profile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Center locking rotor interface. Lockring is included - Lifetime warranty

Thanks to Zipp’s Total System Efficiency (TSE) carbon laminate and design, the Super-9 is engineered for a new era of wider tires and lower tire pressure in TT and triathlon. Combining Zipp’s wheel laminate with a wider rim profile and optimized tire interface helps you overcome the four barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The Super-9 is fastest with 28mm tubeless tires inflated to lower than traditional pressure. To ensure proper inflation, the Super-9 comes with the TyreWiz 2.0 tire-pressure monitor integrated out of sight and perfectly balanced so you’ll always know if you’re in your desired PSI/bar range. Inflation is a breeze with redesigned pump access. Moreover, the disc features a redesigned pump-access port—no stickers needed. The Super-9 features the premium ZR1 hub with ceramic bearings and 66 points of engagement. - Aero, durable, light weight - Tubeless compatibility for optimization of wider tires with lower tire pressure, lower rolling resistance, and increase grip and compliance - Greater stopping power and modulation of disc brakes - 23mm internal rim width - 28mm minimum and optimal tire size recommended - Integrated TyreWiz 2.0 tire pressure monitor and redesigned pump access cover - Low drag ceramic bearings for race day performance - Includes pumpchuck adapter and Zipp wheel bag

- Zipp's most advanced and fastest deep-rim wheel for road, triathlon, and time trialing - More than 300 grams lighter that previous model - Optimized tire bed for easy tire installation - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction - Center locking rotor interface. Lockring is included with the wheels - Zipp graphics applied using Zipp's ImPress direct-print technology - Minimum 25mm tire width - Lifetime Warranty

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high-pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. Countless Configurations CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately. Why Choose CZR i23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases.

CZR i23 gravel wheels are designed to minimize weight while blending stiffness and compliance to maximize power transfer and increase comfort. CZR i23 rims feature a 24mm section depth to maximize energy transfer, reduce weight, improve vertical compliance, and reduce rider fatigue while a hooked bead also improves tire retention with high pressure adventure road and gravel tires. CZR I23 CARBON RIMS Reinforced spoke beds improve overall wheel strength and durability while also minimizing weight in areas where less strength, and therefore material, is needed. CZR i23 rims feature 3mm of asymmetrical spoke offset and a 24mm section depth to improve radial stiffness and maximize energy transfer without being affected by crosswinds like other wheels with deeper profiles. SOLID STRIP & TCS TAPE Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 2-CROSS OR 3-CROSS LACING CZR i23 gravel wheels with 24 spokes feature a 2-cross lacing pattern to increase radial stiffness and decrease weight. CZR i23 wheels with 28 spokes feature a 3-cross pattern to increase durability while still providing ample radial stiffness due to the additional spokes. FREQUENCY HUBS The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Frequency hubs laced to CZR i23 wheels feature lightweight pawl springs that minimize drag and therefore improve efficiency for drop-bar usage. AERODYNAMIC WING SPOKES Pillar racing spokes that are cold-forged into an aerodynamic wing shape that reduces drag at the trailing end of each spoke. As a result, wing spokes improve overall efficiency while still retaining the gram-conscious weights of traditional bladed spokes. SAPIM ALLOY NIPPLES All CZR i23 wheels feature time-tested Sapim alloy nipples to further reduce overall wheel weight while still exceeding the durability requirements of gravel. COUNTLESS CONFIGURATIONS CZR i23 wheels are available in a 24-spoke option for riders looking to minimize weight and increase compliance, while the 28-spoke versions are best for heavier or more aggressive riders who prioritize stiffness and durability. All CZR i23 wheels are available with Centerlock or 6-bolt rotor mounts. CZR i23 front wheels use a 12x100mm Frequency hub, but 15mm end caps are also available separately on our Replacement Hub Parts page. WHY CHOOSE CZR I23? Fast and light CZR i23 gravel wheels were designed to minimize weight and maximize compliance on rough gravel roads. With front-wheel weights starting at 620g and rears at 775g, they also deliver the greatest strength-to-weight ratio of any gravel wheelset on the market. We even stand behind them with our Ride With Confidence Guarantee for those few-and-far-between crash replacement cases. Read below for more info.

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro

CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit. Solid Strip & TCS Tape - Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke. 3-Cross Lacing & Brass Nipples - Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together. Frequency Hub - The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement. Heavy-Duty Pawl Springs - CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement. Usage: Trail, Enduro