Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Stan's NoTubes Presta Removeable Valve Core
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
DT Swiss 240s Straightpull Road Front Hub
$169.00
The DT Swiss 240s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
Stan's NoTubes Standard Rim Strip
$22.50
Stan's Standard Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Stan's NoTubes Valor Team 29 Rear Wheels
$825.00
Lighter and stronger than aluminum rims, the Valor’s carbon lay-up is engineered to absorb radial vibrations and impacts through a construction that is both elastic and strong. Stan's NoTubes has constructed a lightweight carbon fiber rim design not just to be stronger than aluminum, but also to perform better in real world riding conditions. Valor wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for cross country racing and riding - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Laser 1.8/1.5/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider tires / 2.00 - 2.25 - 2-year warranty with 3-year crash replacement
Kinetic Skewer
$15.00
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Mavic Flat Carbon Spoke Magnet
$9.00
Tiny yet powerful magnets, compatible with any bike computer, designed to efficiently fit Mavic flat carbon spokes.
Problem Solvers Axle Nut
$3.85
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Zipp 303 Firecrest Carbon Disc Brake Front Wheel (Tubular)
$1,050.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between the rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at a lower pressure, which boosts ride quality and comfort and reduces rolling resistance. Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's outstanding CX-Ray spokes.
Hope Pro 2 Evo SRAM XD Driver
$108.38
Hope XD-11 Freehub Bodies · For XD 11-speed cassette · For Hope Pro 2 EVO hubs · Contains drive side end cap, bearings and driver
Hope Pro 2 & Pro 2 Evo 20mm Through Axle Front Hub End Caps
$32.29
Hope Front Axle Conversion Kits · Compatible with Pro 2 and Pro 2 Evo hubs · Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs
Crank Brothers Front Axle and Endcap Kit
$19.99
Front axle and endcap kits for all non-boost 2017 cobalt, iodine, and zinc wheels. Use this front axle and endcap kit to convert any non-boost 2017 cobalt, iodine, or zinc wheel to the size selected below.
DT Swiss Competition 14/15/14g (Silver) Spoke
$71.99
- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - Includes 12mm 14g silver brass nipples - 192g @ 32h/265mm - Box of 100
Roval CL 50 Wheelset
$1,750.00
After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found—until the CL 50 was developed, that is. We paired our quiver-killing CLX 50 rim with DT Swiss Competition round spokes, our Aero Flange hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the “lightweight” category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1465-gram clincher wheelset that's race-ready and wallet-friendly. - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Material: Carbon - Braking Surface: Carbon Fiber - Brake Track Height: 12mm - Rim Depth: 50mm - Rim Width: 20.7mm internal, 29.4mm external - Front Spoke Pattern: Radial - Rear Spoke Pattern: Radial/Two-cross (2:1) - Spoke Count: 16 front, 21 rear - Spoke Type: DT Swiss Competition Race T-head - Nipple Type: DT Swiss Pro LockBrass hexagonal - Front Hub: Roval AF1, sealed cartridge bearings - Rear Hub: Roval AF1, sealed cartridge bearings, DT Swiss 350 internals, 11-speed - Assembly Method: Hand-built - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, SwissStop Black Prince brake pads
Specialized Stout XC 650b Wheelset
$275.00
650b bikes are all about fun and nimble handling, and the Specialized Stout XC 650b wheels delivers on this in spades—no matter if you're just getting started or you're a seasoned trail rider. It's been built tough to meet the rigors of mountain biking head-on, while the nimble wheel size guarantees a good time. It features a durable, double-wall alloy rim construction that adds strength without stacking on the weight. And to ensure that you'll be able to stop once you get motoring, the wheels are both disc-compatible. High value just met high performance. - Disc-compatible hubs can also be used with traditional rim brakes - Double-wall rims are strong and durable - Machined braking surface creates superior stopping power in any condition - Stainless spokes won't rust, easing long-term maintenance - 8-/9-speed cassette rear hub provides plenty of gearing options for climbing and riding the flats
Specialized Alibi Sport Wheelset
$200.00
Been eyeing our new Airless-tire-equipped Alibi, but already have a trusty commuting steed? Featuring our Nimbus 700x38C Airless tires, the Alibi Sport Wheelset lets you reap the benefits of Airless tires on your beloved ride. With a 7-/8-/9-speed compatible hub, a machined braking surface, and double-wall rims, you'll spend more time riding and less time doing maintenance. - Double-wall rims are strong and durable. - Machined braking surface creates superior stopping power in any condition. - 7-/8-/9-speed cassette rear hub provides plenty of gearing options for climbing and riding the flats. - Standard equipment on Alibi Sport bike. - Quick-release/Alloy hubs w standard cassette body. - Comes with Nimbus 700x38C Airless tires. - Rim brake only. - Perfect for upgrading hybrids to Airless technology. - Sold as a set.
Roval CL 50 Disc Wheelset
$1,750.00
After designing the CLX 50s, we realized that an affordable, race-worthy carbon wheelset was nowhere to be found—until the CL 50 Disc was developed, that is. We paired our quiver-killing CLX 50 Disc rim with DT Swiss Competition round spokes, our Aero Flange Disc hubs with DT Swiss 350 internals, and steel bearings to deliver you an exceptional wheelset at a more than accessible price. Why disc you ask? With our disc-specific rims, you not only ditch the brake track, but you get a stronger, more impact-resistant rim. This comes at the hands of a disc-specific carbon layup that optimizes stiffness and keeps weight as close to its rim-brake brethren as possible. And all the while, you get incredible brake modulation and power in all conditions. Sharing rims with the CLX 50s, the CL 50s feature many of the benefits as their higher-end siblings. Even though the CL 50 is similar in weight to many wheels in the “lightweight” category, aerodynamics came at the forefront of the development. With this, we jumped headlong into Computational Fluid Dynamics computer modeling to arrive at various rim shapes that could make the CL 50 as fast and light as possible. It took a while, but we narrowed the rim shape down to three contenders that were then CNC machined into rims, built into wheels, and put into the Win Tunnel. In the tunnel, we tested every wheel, ours and the competition's, with a 24C tire (measuring 26C), as tires can drastically affect testing. We chose a modern-width tire to design our rims around, because they not only allow for less tire pressure (which results in more comfort and less rolling resistance) but are also just as aerodynamically efficient when paired with the correct rim width. Now it was time for final testing validation. The result? A 50mm-deep, 1515-gram clincher wheelset that's race-ready and wallet-friendly. - Rim Type: Carbon clincher, 2Bliss-Ready - Rim Material: Carbon - Braking Surface: Disc brake only - Rim Depth: 50mm - Rim Width: 20.7mm internal, 29.4mm external - Front Spoke Pattern: Two-cross/Radial (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: 21 front, 24 rear - Spoke Type: DT Swiss Competition Race T-head - Nipple Type: DT Swiss Pro LockBrass hexagonal - Front Hub: Roval AFD1, Centerlock, sealed cartridge bearings, quick-release or 12mm thru-axle end cap - Rear Hub: Roval AFD2, Centerlock, sealed cartridge bearings, DT Swiss 350 internals, 11-speed, quick-release or 142x12mm thru-axle end cap - Assembly Method: Hand-built - Extras: Roval steel quick-releases, Roval tubeless plugs and valves, Front quick-release & 12mm endcaps, Rear quick-release & 142x12 thru-axle endcaps - Total Wheelset Weight: 1,515g
Easton EC90 SL Disc Rear Wheel
$969.99
From cyclocross to loading up the miles on bumpy backroads, Easton's EC90 SL Discs are the go-fast wheels you've been waiting for. Tipping the scales at a feathery 1,610 grams for a wheelset, the EC90s are smooth-riding, unbelievably aero, and fast, fast, fast! Easton's Fantom rim shape has been scaled down to 38mm deep, providing major aero advantages in a mid-depth wheel. The Road Tubeless rims let you ride with lower tire pressures and fend off flats. With fierce acceleration and the compatibility of a six-bolt rotor mount you'll be impressed by how your standard riding loops take on a whole new speed with new apexes and lines, up and down.
Race Face Next R 27.5-inch Front Wheel
$724.99
Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Next R 29-inch Rear Wheel
$774.99
Race Face's first carbon wheelset comes to market during Peak Enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life, and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 Year No Fault Guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos
Race Face Turbine/Aeffect End Cap Set
$22.99 - $28.99
Axle conversion kits for Race Face Turbine/Aeffect hubs. - Select from front or rear applications
Campagnolo Bora One 50 Clincher Wheelset
$2,525.00
The legendary Campagnolo Bora One 50 is not just for the pros. Features of this wheel are the height of its rim, capable of winning while sprinting with Greipel or racing uphill with Valverde, a new width that ensures comfort, stiffness, reactivity and cutting-edge aerodynamic performance, 3Diamant finish on the braking track for powerful, modular braking, exclusive G3 spokes combined with external nipples for always efficient maintenance, different diameters on front and rear hubs with cone/cup system and USB bearings that offer the Bora one 50 rider a smoothness that is however superior to traditional systems. All this makes it the ideal choice for competitive cyclists at any level and, from today, also for amateurs thanks to the arrival of the clincher version. - 50mm carbon rim ensures the best aerodynamics and light weight - G3 spokes offer the best balance for traction forces, guaranteeing top power transmission - Aerodynamic profile spokes ensure maximum air penetration - Aluminum hubs with ceramic USB bearings guarantee performance and maximum durability - 3Diamant technology guarantees top braking performance for a carbon wheel, for improved safety and easier use - Clincher version guarantees the cyclist all the convenience of an easy-maintenance tire - Carbon rim structure ensures lower weight - Brake pads with dedicated compound (red) ensure safe modular braking - Weight: 1,485 grams
Stan's NoTubes 3.30/3.30Ti 9mm Hub Kit
$20.00
Stan's 3.30/3.30Ti 9mm Hub Kit makes Stan's 3.30 front hubs compatible with a 9mm thru-axle. Installation is easy—just pull the old ones off and put the new ones on.
DT Swiss 240s Straightpull MTB Center Lock Rear Hub
$369.00
The DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between light weight and reliability. The straigh tpull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. And the Center Lock rotor attachment makes installing and removing rotors fast and simple.
Wheelsmith Straight 14g (Silver) Spoke
$31.50
- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50
Stan's NoTubes 3.30/3.30Ti Rear QR Caps (Type 2 Axle)
$23.00
Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub.
Stan's NoTubes 3.30/3.30Ti Shimano/SRAM Steel Freehub Body (9/10-speed)
$74.00
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30 disc or HD disc rear hubs.
Stan's NoTubes 3.30HD QR Hub Kit
$23.50
Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD 15mm Hub Kit
$20.00
Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's NoTubes 3.30HD 20mm Hub Kit
$20.00
Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Page 1 of 36 Next page