Filter By:
Rigid
$550.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more.
- 15mm thru-axle with 110mm Boost spacing
- Post-style brake mount
- 1.5" tapered carbon steerer
- Two sets of Three-Pack mounts
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"
• Chromoly construction
• V-brake mounts
• I.S. disc mount
• Fits bikes with 20-inch wheels
• Steerer length: 250mm
• Caliper brake mounts
• 385mm axle-to-crown
• Chromoly construction
• 1-inch steerer diameter
• Threaded fork
$579.95
You love the accuracy, efficiency, and trail feedback that only a rigid mountain bike fork can provide. And, of course, you love carbon fiber. The Ritchey WCS Carbon Mountain Bike fork was made for you and your riding style. Our deep mountain biking heritage, decades of on-trail research, and mastery of modern materials come together to provide a fork that offers an unrivaled riding experience. The one-piece monocoque construction (WCS) of this fork also includes full carbon dropouts as well as non-removable, one-piece carbon disc brake tabs. This fork also features suspension-corrected axle-crown height, plus a Ritchey compression plug is included.
- Material: carbon fiber
- Quick release (not included)
- Post Mount disc brake
- Disc brake rotor compatibility: 160mm (max 180mm)
- Steerer length: 300mm
- Crown diameter: 50mm (straight 1-1/8”) – 61mm (tapered 1-1/2”)
- Fork lenght: 459mm (27.5”) - 470mm (29”)
- Rake/Offset: 42mm (27.5”) – 45mm (29”)
- Spacing: 87mm
- Minimum tire clearance: 6mm
- Weight: 615g (with uncut steerer / not including axle)
$60.45
Dimension Road Forks are not intended for aggressive riding, stunt riding or road racing.
- Forged dropouts with eyelets, welded unicrown construction
- Designed for short-reach caliper brakes
- 25 x 14mm tapered oval blades
- Axle to Crown Length: 374mm
- Brake Mount (Fork): Short Reach Caliper (39mm-49mm)
- Crown Race: 26
- Front Axle: 10mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill
- Steerer Tube Length (mm): 170
- Steerer Type: Straight
- Weight: 692g
- Wheel Size: 700c
$79.99
Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing.
- Forged dropouts with eyelets
- Chromoly tubing
- Cantilever mounts only (no disc mount)
- Axle to Crown Length: 395mm
- Brake Mount (Fork): Canti Studs
- Crown Race: 30
- Front Axle: 10mm x 100mm
- Maximum Tire Clearance (Fork): 3.8
- Offset: 45mm
- S.H.I.S. Stem Clamp Diameter: 25.4
- Steer Tube length: 260mm
- Steerer Type: Straight
- Weight: 1000g
- Wheel Size: 26-inch
$130.00
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat.
- Axle-to-crown: 400mm
- Offset: 44mm
- Steerer: 300mm
- Tire Clearance: 700c x 45mm
- Weight: 2.3 lb (1.0kg) uncut
$199.00
The Dinner Fork is non-suspension corrected and accommodates 26", 27.5", and 29" wheel sizes. If you want to run fenders alongside an 8 or 24-Pack style rack, this fork can do that. Hell, it relishes it. To give you even more options for carrying miscellaneous items, we put a set of 3-pack mounts on each fork blade, too.
Run it on your current Surly for a thought-provoking new experience, or throw it on a different rig to unlock some off-road capabilities. A truly versatile piece of cutlery, the Dinner Fork features 100% Surly Chromoly steel construction, 51mm IS disc brake mounts, and clearance for tires up to 26 x 3.0", 27.5 x 2.8", or 29 x 2.2".
Specifications:
- Axle-to-crown: 420mm
- Offset: 50mm
- Steerer: 350mm, 1-1/8" straight
- Tire Clearance: 26 x 3.0" (without fenders); 27.5 x 2.8" (with or without fenders); or 29 x 2.2" (without fenders)
- Weight: 2.75 lb.
$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it.
Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril.
26 Inch
- Axle-to-crown: 376mm
- Offset: 45mm
- Steerer: 42–54cm frames = 300mm, 1-1/8" straight
- 56–62cm frames = 400mm, 1-1/8" straight
- Tire Clearance: 26 x 2.1" (with or without fenders)
700c
- Axle-to-crown: 390mm
- Offset: 45mm
- Steerer: 56–64cm frames = 350mm, 1-1/8" straight
- Tire Clearance: 700c x 47mm (with or without fenders)
$175.00
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing.
- Axle-to-crown: 483mm
- Offset: 47mm
- Steerer: 260mm, 1-1/8-inch straight
- Tire Clearance: 26 x 5.25-inch
$135.00
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic.
- 100% CroMoly steel construction, curved blades, powdercoated
- Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown
- 51mm IS disc brake mount
- 700c has clearance for a 45mm tire
$175.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!).
- 100% CroMoly construction, fully brazed crown
- Mid-blade thru-blade eyelets
- Rack and fender eyelets at the dropout
- 12 x 100mm thru-axle
- Clearance for 27.5 x 2.32 or 700c x 42mm tires
$185.00
The Moonlander Fork is made from Surly's 4130 Chromoly steel with Natch tubing and double-butted tapered fork blades. It’s TIG-welded and ED-coated, and comes in a 12x197mm thru-axle version with plenty of bottle mounts and rack mounts for additional cargo storage.
Axle-to-crown: 460mm
Offset: 50mm
Weight: 4 lbs 2oz
$135.00
Our Straggler Fork is a lugged and brazed Chromoly fork with room for tires up to 50mm wide. It features fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts, and threaded eyelets on the sides of the crown for accessories. The Straggler fork is equipped with a 51mm IS disc caliper mount and has no accommodation for rim brakes. Similar to its frame counterpart, the Straggler fork is offered in both 650B and 700c sizes.
650B
- Axle-to-crown: 380mm
- Offset: 44mm
- Steerer: 360mm, 1-1/8" straight
- Tire Clearance: 650B x 50mm (650B x 42mm w/fender)
- Weight: 2.4lb (1.1kg) uncut
700c
- Axle-to-crown: 400mm
- Offset: 44mm
- Steerer: 300mm, 1-1/8" straight (42-58cm); 350mm, 1-1/8" straight (60-62cm)
- Tire Clearance: 700c x 50mm (700 x 42mm w/fender)
- Weight: 2.5lb (1.15kg) uncut
$135.00
The Straggler fork is very much like the Cross-Check fork — it's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes.
- Axle-to-crown: 400mm
- Offset: 44mm
- Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm)
- Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
$130.00
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets.
- Disc or rim brake compatible
- Compatible with disc brakes and rack simultaneously
- Fits 26-inch wheels with clearance for a 3.0-inch tire
- Steerer Type: Straight 1-1/8-inch
- Sleek powdercoat finish
$179.99
- Tange Infinity CrMo steel uni-crown fork for 26 MTB wheels
- Suspension corrected for 80mm travel 40mm rake
- Cantilever brake studs with dropout eyelet
- Fork tip double eyelets (updated 2022)
- 440mm axle to crown length (ideal for frames designed for 26" wheel 80-85mm travel forks; will also work well with frames designed for 100mm travel fork and have head angles 70 and slacker)
- 1-1/8 CrMo steerer (250mm)
- 40mm rake
$179.99
- Tange Infinity CrMo steel unicrown fork for 26 MTB wheels
- Suspension corrected for 80mm travel 26 frames 40mm rake
- All have 51mm International Standard disc mount
$169.99 - $189.99
Laterally stiff and fine riding steel-lugged cross fork. Features a sloping lugged crown with cutouts on outside tangs, long inside tangs, and an International Standard disc tab.
- Tange Infinity chromoly steel blades and steerer - Rack eyelets for fenders and braze-ons for low-rider panniers
- 1 1/8" threadless steerer
- 350mm long steerer
- 44mm rake
- 400mm axle to crown
- 60mm inside width
- Lugged Cross fork to match Double Cross Cyclocross frames
- Lugged crown with Tange CrMo construction
- Features eyelets for front rack and braze-ons for low-rider panniers
$169.99 - $179.99
Lugged investment cast crown with cutout in outside tang, long inside tang. Crown drilled for brake. Tange CrMo steel steerer tube and blades.
- 1" steerer tube, threadless, 300mm long.
- 369mm axle to crown
- 38mm and 30mm(only in black) rake.
- Lugged crown with Tange Infinity CrMo construction
- Threaded models have 50mm of thread
- All accept a standard road caliper brake
$169.99
- Designed for cantilever brakes
- Tange Infinity CrMo steel blades with D-shaped cross section
- Fender eyelets at fork tips
- Low rider pannier rack eyelets
- Steerer 1-1/8", 350mm long, CrMo
- Axle to crown 400mm
- 44mm rake
- Anti-rust coating
- Max tire clearance 700c x 40mm (27.5 x 2.0")
- Black
$259.99
- Unicrown design with Tange Infinity CrMo steel tubing
- Single eyelets pannier rack mounts and mini rack mounts
- Fits 700c x 45mm tires with fenders
- 15x100mm thru axle and International Standard disc brake mount
$279.99
A tough unicrown fork option for the Soma Wolverine and other gravel/CX frames with a 1-1/8" headtube. Version 3 model has a new fork end design and adopts the flat mount disc standard
- Unicrown design with Tange Infinity CrMo steel tubing
- Triple bosses on fork leg to fit low rider pannier rack or cage
- Fits 700c x 45mm tires with fenders
$599.00
The Firestarter Carbon Fork is Salsa's high-end, rigid bikepacking fork. This sure-tracking platform features a carbon structure and 15mm thru-axle design, and the Three-Pack mounts on the forward portion of each leg allow use of Salsa Anything Cages or extra water bottle cages.
- Axle to Crown Length: 483 mm
- Brake Mount (Fork): Post Mount 160
- Crown Race: 40
- Front Axle: 15mm Thru x 100mm
- Wheel Mount Center Offset (mm): 0
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Steerer Tube Length (mm): 260 mm
- Weight: 620 g
- Wheel Size: 29er, 29+, 700c
- Rotor Size (Fork): 200
- Maximum Tire Clearance (Fork): 3
$599.00
The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160mm minimum rotor size; 180mm maximum rotor size
- Mid-blade mounts for low rider racks
- Compatible with wheel sizes: 27.5+, 29", 29+, 700c
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- BOOST 110 x 15mm thru axle included
- Front Axle Size: 15 x 135L, TP=1.5, TL=10
- Internal routing for 110 BOOST dynamo hubs
$569.00
The Kingpin Deluxe fork is perfect for fat bike expeditions, keeping you nimble even when fully loaded. Dual Three-Pack mounts on each leg let you attach water bottles or Anything Cages, and mid-blade mounts fit low rider racks for panniers. Or, ditch the gear and hit the trails with an ultra-light and responsive fork.
- High modulus carbon fiber construction
- Tapered 1-1/8" to 1-1/2" steerer tube
- 160 minimum rotor size; 203mm maximum rotor size
- Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles
- Mid-blade mounts for low rider racks
- Internal routing for 150mm spaced dynamo hubs
- Maximum Tire / Rim sizes: 26 x 5", 27.5 x 4.0", 29 x 3.0"
- 150 x 15 mm thru axle included
- Front Axle Size: 15 x 198L, TP=1.5, TL=9
$329.95
With vibration-muting carbon blades, and alloy steerer and crown, the Comp carbon/alloy cross and road fork is ideal for cyclocross pursuits or road riding.
- Material: carbon blades / alloy steerer, crown, and dropouts
- 1-1/8" straight steerer
- Steerer length: 300mm
- Axle-crown: 391mm
- Rake/Offset: 48mm
- Crown diameter: 45mm (1-1/8")
- Spacing: 57mm
- Minimum tire clearance: 6mm
- Wheel compatibility: 700c
- Fender mounts
$599.95
With more than 40 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Adventure Fork for those of us that are unbound by the constraints of riding-surface type, seemingly insurmountable distances, or what you can carry on your bike.
The new one-piece carbon monocoque WCS Adventure Fork has been meticulously engineered and painstakingly built to perform with razor-sharp accuracy, deliver a high level of comfort, and offer practical features for all manner of cycling adventures. Built with High Modulus Fiber (HMF), this impeccable adventure fork offers superior strength while also reducing road chatter fatigue on those endless days and nights in the saddle. Smooth internal fiber flow in the crown/steerer area delivers the best force transfer from the crown to the shaft and offers increased impact strength for those potholes you didn't see.
With your desire to ride far and long in any condition or under any circumstance, the WCS Adventure Fork features rack mounts for packs full of gear and fender mounts to keep the grime off you and your bike. The three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe.
Welcoming flat-mount disc brake calipers, the WCS Adventure Fork also fits up to 48mm tires (depending on tire make and model)—making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering, and enjoying the adventure.
- Material: carbon fiber
- 1-1/8" straight steerer with integrated 45-degree crown race
- Fits 1-1/8 and 44mm headtubes with appropriate headsets
- 100x12mm thru-axle (included)—(100x15mm thru-axle conversion kit available separately)
- Flat Mount disc brake
- Disc brake rotor compatibility: 140 / 160mm
- Steerer length: 300mm
- Axle-Crown: 393mm
- Rake/Offset: 50mm
- Spacing: 60mm
- Minimum tire clearance: 4mm Road / 6mm Off-Road
- Wheel compatibility: 700c / 650b
- Rack and fender mounts
- Multi-purpose mounts on fork blades (includes black stainless-steel bolts)
- Fork max payload: 3kg per side
- Weight: 445g (with uncut steerer / not including axle)
$449.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Canty Fork is designed for the rigors of cyclocross and those who demand traditional canti brakes. Decades of experience between the course tape and building the bikes and components designed to win inform the performance and design details of this fork. It employs a monocoque construction, and it's compatible with standard and integrated headsets.
- Material: carbon fiber
- 1-1/8" straight steerer with integrated 45-degree crown race
- Fits 1-1/8 and 44mm headtubes with appropriate headsets
- Steerer length: 300mm
- Fork length: 395mm
- Rake/Offset: 45mm
- Crown diameter: 45mm
- Spacing: 54mm
- Minimum tire clearance: 6mm
- Wheel compatibility: 700c
- Weight: 448g (with uncut steerer / not including axle)
$579.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount.
- Blade: Carbon
- Crown: Carbon
- Steerer: Carbon
- Steerer Length: 300mm
- Steerer Diameter: Tapered 1-1/8 – 1.5-inch
- Rake: 45mm
- Blade Shape: Curved
- Drop out: Carbon
- Rotor size: 140mm (160 w/ adapter)
- Crown Diameter: 45mm
- Integrated 45-degree crown race
- Axle-to-Crown: 395mm
- Finish: Matte UD carbon
- Weight: 440g (w/ uncut steerer)
- Compression plug included
Page 1 of 2
Next page