Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE
Service kit for 100 hr service (re-adjusting play and replacing wiper). There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser: https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf Kit includes: - 1x Wiper (with spring) - 6x Glide pin - 1x Lower bushing (grey, with line marking) - 1x Foam ring - 1x C-clip R12
- Low-rise Black Ops chromoly BMX handle bar - 30-inch width with a 6-inch rise - Wide and low - Clamp Size: 22.2mm - Material: Chromoly
- Business in the front, party in the back with these 2-tone BMX saddles - PVC cover with a colored back strap and steel rails - Use: BMX - Rail: Steel - Cover Material: PVC - Size (LxW): 260mm x 160mm - Gender: Unisex
- Durable nylon+fiber body - Heat-treated chromoly spindle - Molded pins - Loose ball bearings - 375g/pair
- Forged alloy V-brakes with 103mm arms - Brilliantly anodized in a variety of colors - Compatible with 70mm threaded brake pads - Front or rear - 21mm–35mm reach
These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time. Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off. Clean, simple, and fast! Replacement for Fox PN: 820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly 820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)
Get Wild with Extra Stiffness and More Clearance These super tough axles are constructed to Rockshox's exact specifications and made from 7075 Aluminium. Unlike any other fork axles on the market, these feature a 6mm allen key fitting on both ends of the axle. This "Get out of Jail" feature might be pretty handy if you manage to chew one end up rushing to put your wheel on when your mates have already set off. We've all been there.... Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel isn't falling off. Benefit from the increased clearance without a lever in the way getting wacked by trailside debris!
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided. Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits the following Santa Cruz bikes: - 5010 V1, V2, V3 - Bronson V1, V2, V3 - Nomad V2.1, V3, V4 - Chameleon V5, V6, V7 - Heckler V7 - Heckler E-Bike V8 - Heckler MX E-Bike - Bantam V1 - Blur TR V1.1 - Blur XC V2.2 - Blur LT V2.2, V2.1c - Blur V3 - Highball V1, V2, V3 - Tallboy LT V1.1 - Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only) - High Tower V1 and V2(MY20 & MY21 only) - High Tower LT V1 - Mega Tower V1 - And Juliana Equivalents Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.
Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. - Please visit https://burgtec.co.uk/product/trek-184-5mm-rear-axle/ for complete fitment info. - Thread M12 x 1.75mm pitch
GXP Boost 3mm Offset Thick Thin Chainring. Awesome chain line plus awesome chain retention enough said. - 12 spd Eagle compatible. - Designed and tested in MTB heaven, the Peak District. - Keeps your chain on!
Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.
When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.
"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On
Campagnolo Pulley Assemblies - Drivetrain Speeds: 10 - Does not fit 2004-2008 Record 10 speed (carbon pulley cage)
- 50 tooth 11 speed Campagnolo chainring, for use with 34 tooth threaded inner chainring - Compatible with 2011-2014 Super Record, Record, Chorus and Comp Ultra cranksets - 110mm BCD
Put all your power into the pedals and race forward and put your confidence in the Campagnolo Potenza 11 brakes to keep you in control when needed. These are dual pivot front and rear brakes with forged alloy Skeleton arms that are lightweight and stiff. Includes special compound brake pads for optimal braking on both wet and dry surfaces. - Adjustable pad holders allow for micro adjustment - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Position: Set - Brake Lever Actuation: Short Pull - Defined Color: Black - Pad Type: Cartridge - Weight: 321 grams
Campagnolo's Record EPS V2 Power Unit is the reliable brain of Campy's electronic shifting. In order to keep your bike looking sleek, the mounting options allow it to sit inside your bike's frame. The 3-cell, 12-volt Lithium-ion battery delivers up to 1,200 miles on a single charge. It also houses the electronics necessary to deliver pinpoint shifting precision to the front and rear derailleur mechanisms (sold separately). For example, if you're cross-chained, the system immediately senses it and moves the front derailleur ever so slightly to avoid chain rub. Plus, the one-piece, ultrasonically-sealed unit is impervious to water or road vibration.
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm
- Grade 10 chromium steel balls
Housing liner provides an extra line of protection between cables and housing. - Bridges gaps between housing segments
KS Dropper Post Service Parts
- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.
Don't let chain slap damage your frame — pick up Lezyne's C-Stay Protector. It's made of heavy-duty neoprene with a slip resistant rubber inner and a Velcro closure to keep it in place.
The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only
Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket makes your SRAM GXP crankset a powerhouse without weighing you down.
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. Shifting pins and ramped teeth deliver precision shifting, too.
SRAM's DoubleTap Control Levers are the cornerstone of SRAM's road biking world. Because you're able to shift from the hoods, drops, and even when sprinting, the Rival levers offer a competitive advantage that can't be touched. The single-lever-shifting design allows for faster, smoother shifts while being completely independent of the brake levers, eliminating the possibility of engaging the brakes when you shift. Plus, the carbon fiber ergonomic levers are incredibly light, aero and hide all the cables for an ultra-clean look.
Stainless steel cables are extruded to provide a smooth low-friction surface.
When things get hectic, a missed shift can be the difference between winning and losing, cleaning a hard section or walking. So SRAM designed the ultra-compact X9 shifters with an Exact Actuation 1:1 cable pull ratio and the same ball bearing lever pivots used in XO and XX shifters to deliver lightning fast shifts. Crafted from lightweight aluminum and composite materials, the X9s will meet the demands of any rider. You've got plenty going on when flying down the trail, with SRAM X9 triggers that list gets a lot shorter.
Shimano's 105 Bottom Bracket Cups are for Shimano's integrated crankset (FC-5600) and feature minimal bearing resistance for smooth pedaling.
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Shimano's Deore Hydraulic Disc Brake levers offer high performance at an entry-level price. You get powerful and responsive braking for a wide range of riding styles, from XC to all-mountain with stable performance in any condition. - Smooth and predictable control with balance of power and rigidity - Durable construction with a cool integrated appearance - Sleek and resilient master cylinder design - Servo wave high power brake - Brake Compatibility: Hydraulic disc brake - Brake Lever Size: 2
The Shimano XT BR-M8020 brake caliper is powered by 4 pistons for exceptional braking power. This hydraulic caliper features Shimano's One Way Bleeding technology. - One Way Bleeding prevents air in the hydraulic system by streamlining the oil route throughout the system - Brake Caliper Type: Post Mount - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: Mineral Oil - Pad Compound: Resin
Shimano Deore XT RD-M786-SGS Rear Derailleur Inner Cage Plate - OEM inner cage plate for XT RD-M786-SGS, SLX RD-M675-SGS
The Shimano Tiagra ST-4720 hydraulic shift/brake lever brings the all-conditions confidence and refined ergonomics of hydraulic disc brakes to the quick and intuitive shifting cyclists expect from Shimano Tiagra. - Smooth and effortless operation that offers quick and intuitive shifting operation - Greater reach adjust range allows for better rider comfort and control in all conditions - Redesigned internal shifting unit - Compatible with Shimano road 10-speed rear derailleurs
Shimano's Tiagra Dual Control Lever (2x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. -Model Number: ST-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Front Shifting: 2 - Shift Cable: Lever side:OT-SP41 / RD side: OT-SP41 Sealed - Reach Adjuster: Screw
- Compatible with 6 and 7-speed SIS Index Shifting drivetrains - Includes BMX/track frame hanger
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - OEM 39t chainring for Ultegra FC-6700-G and FC-6601-G (grey) cranksets
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set. - OEM pulley set for XTR RD-M9000 - Sealed bearing guide & tension pulley - Guide pulley with extra long teeth for increased chain control
• Forged aluminum • Classic streamlined shape • 2-bolt clamp • 180mm tall
• Singlespeed crankset • Alloy crankarms w/ solid steel chainring • Square taper interface • Does not include BB
• Singlespeed crankset • Forged alloy crank arms • Square taper interface • Does not include BB • 42-tooth chainring • Double chainring guard • Bolt Pattern: 104 x 4-bolt • 670 grams
• OctaLink interface • Only includes left crank • 175mm length
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
- MTB or Road - 1.5 x 1855mm - Galvanized
• Fits one-piece cranksets • Steel construction • 44T • 3/32"
• Ergonomic shape • Soft Kraton Rubber material • 7/8" • 110mm
Lightweight aluminum construction with a versatile riser bar design.
- Extends pedals - Not for use on exercise bikes
Page 1 of 112 Next page