- AIRFLOW CONTACT SYSTEM offers perfect back ventilation - VENTIFLAP for uphill- and downhill mode adjustment - 2 BOTTLE CARRIERS with extra safety fixation - easy to reach - Includes 1.5L bladder and magnetic tube clip
Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage
The Carbon Sonic Rear Carrier is one of Xlab's most versatile carriers. It quickly attaches to the seatpost of your 2012 or older Cervelo P2, P3 or P4 (ones with two 6mm holes) along with the new QR PR6 and offers all the options you could ever want for carrying a bag, your hydration and inflation — you name it. And, it's super light at only 49 grams, thanks to the carbon construction. Plus, with 18 mounting positions, you're sure to find the perfect location for keeping your gear within easy reach.
Carry your gear behind you tucked out of the wind with XLAB's Carbon Wing Dual Rear Carrier. This versatile aero add-on provides options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages mount on the outside and tubes can go underneath (all accessories sold separately). The possibilities are endless. You also have 3 mounting options that fit most seats so you can place your bottles just where you want them. And, the Carbon Wing is made of stiff, super-light carbon so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps. It can be used with standard 7mm metal-rail saddles or carbon-rail saddles.
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta Sonic mounts on seat posts which have a 10mm horizontal hole at the back. The rod installs into the seat post for a sturdy, solid system. The system includes a Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
$49.95 - $54.95
Torpedo innovation meets vertical bottle design. Brand new 28-ounce (828mL) hydration system with minimal frontal area. Includes composite mount and clamps, splash-proof lid over quick-fill opening, straw with bite valve, and Hydroblade bottle. All-in-one system for one great price! The Hydroblade is for casual mountain biking with front suspension forks. The most convenient, complete vertical hydration system available. - Safer riding - no reaching down for your bottle - Easily refuels. Simply lift lid and fill using wide mouth, quick-fill opening - Bite valve keeps straw full for quick drinking - Comes complete with easy clip-on clamps for triathlon and TT Bars - Mount the Hydroblade on MTB, fitness, drop or flat bars using the Hydroblade Universal Mount, available separately. - Fits widest range of bars – 80-160mm (center-to-center) Easy to Drink and Refill - Hands-free drinking. Simply sip from the straw, keeping your eyes on the road ahead. - NEW ClickCover! ClickCover designed with grippy pull-tab for opening. Simply pop open and refill via Split Cap. Insert bottle nozzle into aperture for fast, quick refill. - Comes with two cap styles! System also includes highly-acclaimed classic Torpedo Clear Cap. Wide mouth, quick-fill opening also makes mid-ride refill of tablets or powder a breeze. - Top-of-the-line bite valve decreases bloating by reducing air intake when sipping - Flat bottom allows bottle to stand upright on counter when filled Clean, Aerodynamic Design - Computational Fluid Dynamics (CFD) optimized aerodynamic shape to minimize system drag - Flow straighteners molded in for added drag reduction Highly-Acclaimed Megadjust Mounting - Securely adjusts to widest range of cockpit configurations 80mm-160mm (center-to-center) - Accommodates up to 20° of aerobar extension rotation SecureClip Brackets - Clips onto aerobar extensions for a clean bike aesthetic. Eliminates need for extra zip-ties, rubber bands or electrical tape to prevent rocking or tilting - Fits 22.2 diameter aerobar extensions
• Complete packaged system containing all essential items for training and Olympic race distances • Includes essentials needed to do an Olympic distance triathlon • Includes the key items you need for longer training rides • Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: • TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. • STEALTH POCKET 400: Large capacity nutrition top tube storage bag accommodating most bikes. Features reinforced sides to maintain aerodynamic shape. • DELTA 100 SYSTEM: Single bottle, saddle-mounted hydration system featuring a 5 lb grip force cage. Fits most standard saddle rails. • MULTI-STRIKE REPAIR HOLDER: Streamlined repair storage holder mounting to the DELTA 100 system. Holds clincher or tubular tire repair kits. • NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation. • AIR STRIKE CO2 cartridge: Two 16 gram CO2 cartridges.
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
$102.95 - $105.00
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty
Introducing XLAB's latest generation of their Torpedo Mount, the Torpedo Mini Mount Aluminum. XLAB's Torpedo Mount lets you carry hydration and computers on your aero bars and actually reduces your aero drag, too! The Mini is narrower to accommodate the trend to running aero extension bars closer together, and it's longer to support XLAB's new horizontal Torpedo bottle (sold separately). Plus it offers high adjustability for easy fitting. Best of all, a designated slot up front allows you to position your computer for easy viewing. No more looking down to see your data! Go with the originators of the horizontal bottle mount; choose the experts: XLAB!
Introducing XLAB's latest generation of their Torpedo Mount, the Torpedo Mini Mount Carbon. XLAB's Torpedo Mount lets you carry hydration and computers on your aero bars and actually reduces your aero drag, too! The Mini is narrower to accommodate the trend to running aero extension bars closer together, and it's longer to support XLAB's new horizontal Torpedo bottle (sold separately). Plus it offers high adjustability for easy fitting. Best of all, a designated slot up front allows you to position your computer for easy viewing. No more looking down to see your data! Go with the originators of the horizontal bottle mount; choose the experts: XLAB!
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
XLAB's Torpedo System 100 is the cutting-edge of aerodynamics, combined with ultra-light design and state-of-the-art ergonomics... your next hydration system is here! The Torpedo System 100 is a low-cost refillable BTA system. You can fold the straw with 2 different positions and have your computer in front of the system in easy, line of sight to keep your focus on the road ahead. The system includes XLAB's aluminum Torpedo Mini Mount, Vee Bottle Cage, Aero Computer Mount, 2 Lids, Straw and Bite Valve and all necessary hardware. It's vertically and horizontally adjustable and aerodynamically, it's invisible!
XLAB's Torpedo System 400 is the cutting-edge of aerodynamics, combined with ultra-light design and state-of-the-art ergonomics... your ultimate hydration system is here! The 400 is XLAB's top of the line refillable BTA system. You can fold the straw with 2 different positions and have your computer in front of the system in easy, line of sight to keep your focus on the road ahead. The System includes XLAB's carbon Torpedo cage, carbon Torpedo Mini Mount, Aero Computer Mount, 2 Lids, Straw and Bite Valve and all necessary hardware. It's vertically and horizontally adjustable and aerodynamically, it's invisible!
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
Topeak's Modula II is a sleek bottle cage capable of handling bicycle water bottles and small mineral water or sports drink bottles. So go ahead and buy that sports drink! Now it will fit in your bottle cage.
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)
$24.99 - $25.99
Made with a mix of materials - a carbon shell and glass fiber core - the Ciro bottle cage is optimized to be as light as possible. It's shaped to clamp the bottle very tightly, and has been given a minimalistic design so it does not upstage your bicycle.
The Deva has proven its worth during the cycling classics over cobblestones. Its material and unique cylindrical shape ensure perfect clamping and prevent the bottle slowly working its way up. The cage is designed so that the bottle can be inserted easily and smoothly. And since it's produced in so many different colors, there is one available for everyone's bike.
The Shanti bottle has an innovative, easy-to-clean membrane cap that prevents fluid from leaking when you hold it upside down and enables you to drink the exact desired amount. Twist the cap to lock it and prevent any fluid from leaking out, which is ideal when it is in your bag. In the 'open' position, the bottle is always ready to use, simply squeeze to drink. - Dishwasher safe - Manufactured in the Netherlands
$25.00 - $45.00
An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable
An absolute masterpiece, this cage screams style. The Fly Cage’s clean lines and clean laser logo really stand out. No cage outperforms the Fly Cage Poly—its LockTight Wings design grip your bottle securely while still keeping it easily accessible. - 100% Polycarbonate - LockTight Wings design - Laser-etched logo - Road and MTB approved - High-end and durable
Page 1 of 12 Next page